User Manual

3. Satellite receiver
Navigation system can keep receiving eight satellite signals. As a
general rule, the navigation system can figure out your accurate
location after received 3-4 satellite signals. But sometimes, weather
and tall buildings in the city shall affect the signal receiving effect,
as is shown in following figure:
In tune
Among tall buildings
At the boulevard
The antenna is sheltered
Underground parking Overpass or viaduct
GPS Navigation Function Operation
1. Navigation Function Operation
For detailed operation of navigation function, see “Navigation Operation Manual”.
2. Receiving signal error
When the satellite signals can be normally received, the error of standard GPS shall be about 7 meters,
Driving on parallel sections,there shall be error even the product has auto-correct function. The
normal receiving of satellite signals shall be affected and cause error in following environment.
Touch【 】icon in main menu can enter below interface.
Other Functions
Rearview function
In any running state, the video signal can switch to reverse video state when reversing the car, and
the system shall return to its initial running state after reversing the car.
Backup rearview Analog on-site backup
Warn:
Do not rely on CCD system completely, please make sure your car is safe by your eyes during driving.
Back rearview system only assists in driving. As the distance range of rearview system is limited,
completely relying on the rearview system during driving may cause accidents.
05 10
18. AUDIO button
In DVD mode, press this button to switch
language of dialogue.
In VCD mode, press this button to choose left
track, right track,and stereo.
19. GO TO button
In DVD mode, press this button, you can define
playing time.
20. SUB-T button
In DVD mode, press this button to switch
language of subtitle.
21. PBC button
In VCD mode, press this button to display all
song menus, work with number button to
choose songs.
22. UP, DOWN, LEFT, RIGHT, ENTER button
When playing MP3, USB, SD returns to song
menu, up, down selections can be up / " "
button or down / " " key to select up and down,
select and press " " key to confirm. The selected
tracks can be played.
Press the left or right arrow keys to " " or " "
key, can be on the next page function operation.
23. SLOW button
Press this button can go into the BT dial
interface.
24. ANGLE button
In DVD mode, press this button to change play
angle.
25. SETUP button
In audio mode, press this button to choose
different set items.
26. OSD display
Press this button to display the title chapter and
the left time.
27. ZOOM button
In DVD/VCD mode, press this button to ZOOM
in/out.
28. MENU button
Press button to back to the main menu.
BATTERY CHANGE
When control distance of remote control
becomes shorter or no function, please change
battery, please confirm polarity before change.
One hand press stopper, then pull out battery.
Put battery into controller.
Insert battery holder into controller.