User manual

Page 36 of 51 Vetta Head Assembly Instructions Rev D1
Cable Assemblies
a) Connect the Cable Assemblies
Before securing the completed chassis cover assy to the completed chassis assy, all cables need
to be connected. Use the table below to reference where the cables connect. The photos
following the table in this section reference the cables listed below. Use the table and photos
together to correctly complete this section.
Due to the very repetitive nature of this section, it will be very short on text. Keep the
following things in mind while connecting the cable assemblies:
• Connect all cable assemblies securely.
• Connectors should be fully engaged with PCB header shrouds.
• Some headers on the PCB’s will not be used and will be left empty.
Vetta CABLE TABLE
No. Line6PartNo
Description PCB Position*
No. of
Pins Wire color
1 21-34-0007-2
Amp-Output, Z-sel P4-H3 4 Red
2 21-34-0008-2
Amp Output, 4pin P2-J8 4 Red
3 21-34-0021-2
Pwr Supply – Pwr Amp H6-P3 6 Orange
4 21-34-0014-2
Pwr Supply – Main PCB H7-J49 8 White
5 21-30-0009-2
Pwr Amp – Main PCB P1-H12 10 Grey (ribbon)
6 21-34-0008
Main Power Switch
Cable J1-J2 2 White/Black
7 21-34-0006
Voltage Jumper J2 2 White
8 21-34-0015
Guitar Input J26-guitar PCB 5 White
9 21-30-0026
UI – Main PCB H9-H12 26 Grey (ribbon)
10 40-25-0015
Grounding cable -- 1 Green