User manual
Table Of Contents
Page 38 of 51 Vetta Head Assembly Instructions Rev D1
-CABLE TIE POSITIONS. (6 places)-
\
Secure the main switch cable (#6 above) to
the chassis, using a ziptie as shown in the
adjacent figure. The ziptie will secure to the
chassis by passing it though a lance in the
sheetmetal as shown .
1
2.
ATTACH cable #21-34-0008, TO #2 down
RIGHT CLAMP
ONLY
3.
ATTACH CABLE (21-34-0021) TO
PEM STUD.
4.
ATTACH CABLE (21-34-0021) TO SUPPORT
STRAP