User manual

Page 46 of 51 Vetta Head Assembly Instructions Rev D1
Now affix the Front Handle Bracket using the #6 wood screw (30-00-0019, see below left).
Finish securing the Top Handle Bracket to the cabinet using 2 #10 oval HD wood screws (30-
00-0023) as shown below (right side).
.
b) Attach the Line 6 Logo
Peel off the backing from the logo piece (30-60-0002) to reveal the pressure sensitive adhesive,
center the logo in the bracket depression, and firmly press the logo into place.
c) Insert the Chassis into the Cabinet.
Before mounting the chassis into the cabinet, punch through the vinyl into the pre-drilled holes
in the chassis base. Approximate location for the holes is shown below.
Slide the completed chassis assembly into the cabinet unit the overlay on chassis cover sits
against the inside face of the front cover. Secure the chassis using 4 #10 (30-00-1124) screws
mounted with 4 #10 finish washers (30-03-0011).