User manual

10. & 11. Currently these are empty tests. Press
GATE
to advance past these
tests.
12.
InitDefaults?
This is not an actual test routine but is used for resetting amp model
and effects parameter defaults back to what was originally loaded in
via flash. This is useful if a user has customized one or more of his or
her amp models or effects and decides he or she wants to go back to
the defaults loaded during the last flash update. Please note: this does
not affect the presets, just the amp and effect default settings.
Press
COMP
to execute the initialization or
GATE
to skip ahead.
13.
UploadCode?
Again not a test but a way to off-load the current operating system
from the Vetta to a Midi data filer, computer or another Vetta via
Midi. Press
COMP
to begin uploading or
GATE
to skip ahead.
14.
Upload Factory?
This will off-load the factory presets loaded in the Vetta to a Midi
data filer, computer or another Vetta via Midi.
Press
COMP
to begin uploading the current factory presets or
GATE
to skip ahead.
15.
Rcv Factory?
This will prepare Vetta to receive a Midi SysEx data dump of a
factory preset bank from a Midi data filer, computer or other Vetta.
Press
COMP
to prepare the Vetta to receive a factory preset midi
dump or
GATE
to skip ahead.
NOTE:
After
COMPRESS
is
pressed, the Vetta will erase it’s factory and user presets as well as the
internal back up memory before it will receive the new file.
16.
Burn in LEDs?
This will turn on all LED’s until the
REVERB
button is pressed to
exit. To begin LED burn-in, press
COMPRESS
.
If you press
COMP,
the Vetta will call Test #1 (SRAM) back up. To
exit test mode, press
REVERB.