User manual

Page 1 of 51 Vetta Head Assembly Instructions Rev D1
Forward and Notes
The information in this booklet applies the Vetta Head.
This booklet deals with the assembling the major sub-assemblies, the final product, and
quality/inspection considerations. See also the Related Electrical assembly documentation, for major
considerations in assembling the electrical components of the PCBs (through the soldering process and
preparation of the board for addition of custom components).
A note on the text: the illustrations in this book are for reference only. In some cases, color and
geometry of illustrations may not accurately reflect the color or exact geometry of actual parts.
•
Unless otherwise noted, all dimensions are in inches.
•
Part identifying notes are in this format: Description (Part Number)
•
Drawings are not to scale.
•
Torque value tolerance +/- .5 in.-lbs. Do not over tighten any components.
•
For clarity, not all component details are shown. This is especially true with respect to cable
assemblies. They are often omitted from views to provide a clearer picture of the material
discussed. Do not be confused by the absence (or unexpected presence) of any component in
the illustrations in this book.
Vetta Head Mechanical Assy. Rev. D1 MAY 21, 2002
Engineering