User manual

Page 4 of 51 Vetta Head Assembly Instructions Rev D1
a) Attach the Corners and Rubber Feet
Attach the eight corner protectors to the cabinet (30-30-0001) using 16 - #8 truss head Phillips
screw (30-00-0017). Refer to figure below for correct orientation of corner parts.
Attach the rubber feet to the base of the cabinet following the dimensions specified below.
Attach 4 rubber feet (30-48-1686) to the base of the cabinet using 4 #10 wood screws (30-00-
6839). ENSURE THAT THE FEET ARE MOUNTED TO THE CORRECT DIMENSION –
SEE FIGURE AT BASE OF PAGE.
These screws should have a
torque rating of 10 in-lbs. Do
not over tighten.
Corner protector (30-30-0001)
Note: mount so screws (30-00-
0017) attach at sides and top of
cabinet.
Attach Rubber Feet (30-75-0008) at base.
Use #10 screw (30-00-6839)
Front face of cabinet. Base of cabinet.
Appearance of feet when correctly mounted