User manual

Page 29 of 51 Vetta Head Assembly Instructions Rev D1
XX 4 30-00-0025 SCREW,4-40 x 3/16”LG,PPH. ( Large bezel)
XX 1 30-51-0096 SPRING CLIP (small bezel)
XX 1 30-51-0102 PUSH NUT RETAINER (small bezel)
a) Attach the Foam pads, Overlay and Shoulder Washers
BEFORE BEGINNING ENSURE THAT THE CHASSIS COVER (30-51-0076) IS
CLEAN AND CLEAR OF DEBRIS.
First, attach the Foam vibration key pads to the PCBA side of the Chassis cover.
Use the orientation blocks, as shown, to align these with the button cut-outs.
Foam Pad orientation blocks. These are
affixed on a plate, to fit thru the chassis cut-
outs, to help align the pads.
Channel select Foam pad.
#30-40-0003
Edit Select Foam pad.
#30-40-0002
Amp select Foam Pad.
#30-40-0001