Instruction manual

The essentials

To operate a radio receiver:

1 Open/select the memory area with the [] key

2 Select numeric key/scene key (to which you programmed the

desired receivers).

Scenes are retrieved directly.

3 Operate the device with the keys

All remote control keys used for the Merten CONNECT radio

system are marked in blue.

Merten IR devices

Merten supplies devices with an

infrared (IR) interface. You can

operate their functions using

this remote control.

1 Press the SETUP key [ ] for three seconds.

– Wait until the status display goes out again.

– The display now shows EASY CONNECT? and the upper left

corner shows .

2 Activate ADVANCED?.

3 Activate USE AS IR? .

– The display shows SURE?.

4 Confirm/activate with [OK].

– The display shows USE AS IR?.

IR AV devices

This section briefly explains how

you can program IR AV devices

onto the remote control

("learning" function). You can

then use the remote control to

operate the functions of these

devices.

The other configuration options

are explained in the other

sections of this instruction

manual.

1 Switch on the device which you want to set up for the remote

control.

– If the device is a DVD player/recorder or video recorder, insert

a disc or tape and start playback.

2 The remote control switches over to setup mode immediately:

– The display shows , and “TV ?”.

– The background lighting is switched on.

– The keys that you can use are flashing.

SCENE 1 SCENE 2

SCENE

SCEN