Instruction manual

EASY Connect
43
To make it easier to use the
remote control, you can rename
the key. The name is shown on
the display when you press the
key. This means you would not
need to note down the key
assignment separately on a
piece of paper.
Renaming numeric keys
1 Switch to configuration mode.
2 Activate EASY CONNECT?.
3 Activate the memory area with the numeric key which you
want to rename.
4 Activate NAME KEY?. .
– The display shows PRESS 1TO9/SCENE.
– Press the numeric key (1 to 9) or scene (1 to 3) which you
want to rename.
5 Activate with [OK].
– The display shows R1 GRP 1.
– Delete the current name with []. Note: the first letter
cannot be deleted.
– Use [▼] and [▲] to select the letters for the new name (e.g.
LIGHT) and press [] to go to the next position.
When you have finished renaming the numeric key, activate
the new name with [OK].
– The display shows LIGHT?.
6 Exit the setup mode.
This section explains how to
remove the assignment of a
numeric key. This can be
important if you want to save
different radio receivers onto a
numeric key which is already
assigned.
Deleting the assignment of numeric keys
1 Switch to configuration mode.
2 Activate EASY CONNECT?.
3 Activate the memory area with the numeric key which you
want to delete.
4 Activate RESET KEY?. .
– The display shows PRESS 1TO9/SCENE.
– Press the numeric key (1 to 9) or scene (1 to 3) which you
want to delete.
– The remote control automatically deletes the assignment of
the selected numeric key and the display shows OK.
– The display changes back to PRESS 1TO9/SCENE.
5 Exit the setup mode.