Instruction manual

EASY Link
47
Receivers can be operated from
more than one push-button by
copying the connections from
one push-button to the other
push-buttons.
The other push-buttons then
control the same functions on
the same receivers as the
original radio push-button.
You can copy the connections
from one radio push-button to
up to 4 radio push-buttons.
Later, if you program in more
receivers on the first radio push-
button, you must copy the
connections to the other push-
buttons again.
Copying the linked connections of a radio push-
button
1 Switch to configuration mode.
2 Activate EASY LINK?.
3 Activate MODIFY?.
4 Activate READ PB?.
– The display shows WAIT PB.
– Activate the learning mode on the radio push-button (by
pressing 3x).
– The remote control establishes the connection to the radio
push-button automatically.
– Once the connection is established successfully, READ PB?
appears on the display.
– If the connection is not established successfully, ERROR
appears on the display. Repeat step 4.
5 Activate WRITE PB?.
– The display shows WAIT PB.
– Activate the learning mode on the radio push-button (by
pressing 3x).
– The remote control establishes the connection to the radio
push-button automatically.
– If the connection is established successfully, OK appears on
the display and the function of the original radio push-button
is transferred to a new radio push-button as well.
– If the connection is not established successfully, ERROR
appears on the display. Repeat step 5.
6 Exit the setup mode.