Instruction manual

EASY Tool
48
Your electrician has the option of
configuring the remote control
with other configuration tools
(e.g. with the “Merten
CONNECT radio configuration
tool” computer software).
Configuring the remote control with
configuration tools
Activate the learning mode on the radio remote control:
1 Switch to configuration mode.
2 Activate EASY TOOL?.
3 Activate PROGRAMMING?.
– The display shows WAIT TOOL.
– The remote control establishes the connection to the USB
radio data interface automatically.
– Once the connection is established successfully, OK appears
on the display.
– If the connection is not established successfully, ERROR
appears on the display.
4 Exit the setup mode.
|
The options listed under the ADVANCED menu item are
intended for electricians only, as modifications can be made
here which may impair the functioning of the radio devices
and the radio system.
You can use this function to
copy the settings for CONNECT
devices saved on this radio
remote control to another
Merten radio remote control.
Copying settings for CONNECT devices to
another Merten remote control
1 Switch to configuration mode.
2 Activate ADVANCED?.
3 Activate COPY REMOTE?.
– The display shows WAIT REMOTE.
– EASY TOOL must be activated for the other remote control.
– The remote control establishes the connection to the other
remote control automatically.
– If the connection is established successfully, OK appears on
the display.
– If the connection is not established successfully, ERROR
appears on the display.
4 Exit the setup mode.
EASY Tool
ADVANCED