DVD-2800T
Congratulations on your purchase of a R Audio Systems DVD Player. This product has been designed and built to deliver the highest quality video reproduction with CD sound. We are sure you'll enjoy watching your favorite movies with this component as a part of your multimedia. For best results please consult a professional mobile electronics installer for application advice or troubleshooting.
Use Authorized Service Centres Do not attempt to disassemble or adjust this precision product. Please refer to the Service Centre list included with this product for service assistance. FEATURES Compatible with PAL DVD (Video CD) and NTSC DVD (Video CD) This player can play discs recorded in either PAL or NTSC format. For Installation The unit should be installed in a horizontal position with the front end up at a convenient angle, but not more than 30°.
CONTENTS Safety Information ........................................................................................5 Disc Notes .....................................................................................................6 Installation .....................................................................................................7 Electrical Connections .................................................................................8 Remote Control............................................
SAFETY INFORMATION CAUTION: MOBILE DVD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS MOBILE DVD PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE MOBILE DVD PLAYER CORRECTLY AS INSTRUCTED. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND - DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
DISC NOTES Disc formats supported by this player Note these scratches are not an indication of any problem with the player. DVD 12 cm disc (Single-sided disc only) Label side up Video CD 12 cm disc CD 12 cm disc Do not touch the underside of the disc MP3 12 cm disc Do not bend Discs which cannot be played with this player • DVD-ROM • DVD-R/DVD-RAM • CDV • CD-G Wipe the disc from center toward the outside edge Handling and Cleaning • Dirt, dust, scratches and warping disc will cause misoperation.
INSTALLATION SCREW M5x25 TRANSPORT SCREWS SCREW M4x6 SCREW M4x6 3 1 3 2 1 4 2 Note: 1. First remove the two transport screws. Next, attach a mounting bracket on each side of the player using the supplied screws. 2. When attaching the brackets, the mounting position of the player is determined by which pair of screw holes you choose. Select holes 1 and 3 or 2 and 4 depending on which position best suits your application.
ELECTRICAL CONNECTIONS DVD PLAYER DC 12V IN DC 12V OUT REMOTE A/V OUT DIGITAL AUDIO L/R VIDEO YELLOW VIDEO OUT RED AUDIO R OUT AC/DC ADAPTOR WHITE AUDIO L OUT (OPTIONAL) REMOTE CONTROL RECEIVER CIGARETTE LIGHTER 8
REMOTE CONTROL 1 10 2 3 11 12 4 13 6 14 5 15 7 16 8 17 9 1. 2. 3. 4. 5. 6. POWER 0-9 GOTO 7. SUBTITLE 8. 9. 10. 11. 12. 13. 14. SETUP TITLE DISPLAY REPEAT / / SLOW ENTER 15. AUDIO 16. ANGLE 17.
REMOTE CONTROL Preparing the Remote Control Inserting the Batteries 1. Open the battery compartment cover. 2. Insert the new batteries (two AAA size). Make sure that the positive and negative terminals of the batteries are oriented indicated. 3. Close the cover Using the Remote Control Point the remote control toward the front of the player (at the remote receiver “eye”). Operation angle: About ± 30 degree in each the direction of the front of the IR mark.
BASIC OPERATION Stopping Play - Press the (stop) button to stop playback. Press the (Play) button for playback. - Press (Stop) button twice, it will stop the playback and go back to initial Track/Chapter. Return to normal playback by pressing again. Repeat Press the REPEAT button to select repeat modes as follows: DVD: Press the REPEAT button to select repeat mode as follow. Rapid Forward/Reverse Press FF & REW during play.
BASIC OPERATION (2) Press DISPLAY for the second time: On-Screen Display Function Press the DISPLAY button during playback to display the contents of the current disc on the screen.
BASIC OPERATION CD: Press AUDIO during playback. It is possible to switch the sound between monaural and stereo sound. MONO LEFT MONO RIGHT Multi-angle Function (For DVD only) Press ANGLE during playback. Each time the button is pressed, number of the angle changes in sequential order. Notes: - The angle number is different according to the disc. - The function only work for discs having scenes recorded at different angles.
BASIC OPERATION MP3 Disc Play MP3 disc is playing as the format of FOLDER. For example: SMART NAVI ROOT ROOT 0 MP3 MUSIC 1 SKY MP3 HEAR YOUR PLAY MODE FOLDER Use to select the item or folder, then press ENTER button. Pressing REPEAT button repeatedly can select three kinds of repeat play mode. REP-ONE: Play the same song over and over again. FOLDER REPEAT: Play all songs in the current directory in sequence, over and over again. FOLDER: Play all songs in the current directory once.
SETUP INITIAL SETUP GENERAL SETUP SETUP MENU --- MAIN PAGE --- GENERAL PAGE --- GENERAL SETUP TV DISPLAY NORMAL/PS SPEAKER SETUP PIC MODE NORMAL/LB AUDIO SETUP ANGLE MARK WIDE PREFERENCES OSD LANG CAPTIONS SCR SAVER EXIT SETUP 1. Press SETUP in the stop mode. (Press the stop button twice to ensure the player is in the STOP mode). MAIN PAGE TV Screen 2. The initial SETUP menu is displayed. 4:3 Video Material Normal 3. Select the preferred item by using the / buttons.
SETUP --- GENERAL PAGE --- --- GENERAL PAGE --TV DISPLAY TV DISPLAY PIC MODE AUTO PIC MODE ANGLE MARK HI-RES ANGLE MARK OSD LANG N-FLICKER OSD LANG CAPTIONS CAPTIONS SCR SAVER SCR SAVER MAIN PAGE MAIN PAGE ENGLISH OSD LANG type setup Select the preferred OSD language by using the / buttons. PIC mode setup Select AUTO, the player PIC mode will depend on DVD disc. Select HI-RES format for best image resolution. Select N-FLICKER format on format on image or picture under noise affect.
SETUP --- GENERAL PAGE --- AUDIO SETUP --- AUDIO SETUP --- TV DISPLAY PIC MODE AUDIO OUT ANALOG OP MODE SPDIF/RAW DYNAMIC SPDIF/PCM ANGLE MARK OSD LANG CAPTIONS LPCM OUTPUT SCR SAVER ON OFF MAIN PAGE SCR SAVER setup Select the SCR SAVER output ON/OFF. MAIN PAGE AUDIO OUT This is to activate the audio output from ANALOG mode to SPDIF/RAW mode to SPDIF/PCM mode.
SETUP --- AUDIO SETUP --- PREFERENCES SETUP --- PREFERENCES PAGE --- AUDIO OUT OP MODE FULL DYNAMIC 6/8 LPCM OUTPUT 4/8 TV TYPE AUTO AUDIO NTSC SUBTITLE PAL DISC MENU 2/8 PARENTAL OFF PASSWORD DEFAULTS SMART NAV MAIN PAGE MAIN PAGE TV type setup This player can play discs recorded in either PAL or NTSC format. Select NTSC format, when you connected to NTSC TV. Select PAL format, when you connected to PAL TV.
SETUP --- PREFERENCES PAGE --- --- PREFERENCES PAGE --- TV TYPE AUDIO TV TYPE 1G AUDIO 2 SUBTITLE 3 PG SUBTITLE ENGLISH DISC MENU 4 PG 13 DISC MENU FRENCH PARENTAL 5 PARENTAL SPANISH PASSWORD 6 PG-R PASSWORD CHINESE DEFAULTS 7 NC-17 DEFAULTS JAPANESE SMART NAV 8 ADULT MAIN PAGE NO PARENTAL SMART NAV MAIN PAGE PARENTAL Controls Select desired parental guidance using the cursor buttons and confirm by pressing ENTER.
SETUP --- PREFERENCES PAGE --- --- PREFERENCES PAGE --- TV TYPE TV TYPE AUDIO AUDIO SUBTITLE SUBTITLE DISC MENU DISC MENU PARENTAL PARENTAL PASSWORD PASSWORD DEFAULTS DEFAULTS NO MENU SMART NAV SMART NAV WITH MENU MAIN PAGE MAIN PAGE RESET DEFAULTS Press the RESET button to return to the initial factory settings. SMART NAV In this item, you can select NO MENU mode or WITH MENU mode.
SPECIFICATIONS Supply Voltage Chassis Dimensions Weight Current Consumption Signal System Discs Played Audio Output Level Audio Signal Output Characteristics : 12V DC (11V-15V), test voltage 14.4V, negative ground : 160 (W) x 156 (D) x 51 (H) mm 6.3” x 6.14” x 2” : 1.1 kg 2.2 lb : Less than 2A : Compositive video 1.0Vp-p 75Ω : (1) DVD-VIDEO Disc 5” (12 cm) single-sided, single-layer 5” (12 cm) single-sided, double-layer (2) Compact Disc (CD-DA, VIDEO CD) 5” (12cm) disc : 600Ω (2 ch 2.
OWNER’S MANUAL MOBILE TV TUNER UNIT 22
CONTROL & FUNCTION KEYS SEPARATE TV BOX (FOR MONITOR) 2 1 3 4 5 7 6 FIG.
CONTROL & FUNCTION KEYS REMOTE CONTROL 11 10 8 9 12 13 14 15 FIG.2 8. 9. 10. 11. POWER TV/AV AUTO CH+ 12. 13. 14. 15.
TYPE A (FOR MONITOR) (SEE FIG.1): This unit is a separate TV box that can receive DVD/VCD's AV signal and output the signal to the monitor that connected to the unit. And the unit also can receive TV signal through the antenna input jack. 1 DC 12 V IN Through this DC 12V IN jack (1), provide DC 12V power supply to the unit. 2 POWER INDICATOR When 12 volts is supplied to the unit this indicator will illuminate red and the unit will be in stand-by mode.
13 DSP Press DSP button (13), the screen will display the current status such as TV channel / AV. 14 0~9 The numeric buttons (0, 1~9) (14) allow you to select the corresponding channel directly. 15 -/-Press the digital select button (-/--) (15) cooperatively used with numeric buttons to select channel desired.
88-V1742-03