DESCRIPTION OF BUTTONS ON REMOTE CONTROL 1. POWER button 2. A.P button 3. SCN(SCAN) button 4. CLK button 5. SRC button 6. BND(BAND) button 7. Number(0~9) buttons 8. * button 9. MUTE button 10. T-M button 11. TEL button 12. CLEAR button 13. # button 14. PTY button 15. TA button 16. AF button 17. >>|/ DN and |<< /UP buttons 18. SEL button 19.
LOCATION AND FUNCTION OF CONTROLS 1. RELEASE BUTTON 2 .POWER/MUTE BUTTON 3. CD slot 4. LCD 5. EJECT button 6&7. >>| or |<< buttons 8.SEL button and VOL knob 9. 1/TOP/>|| button 10. 2/INT button 11. 3/RPT button 12. 4/RDM button 13. 5/ HANG UP button 14. 6/ TEL button 15. PTY/ SRC 16. AUX INPUT Jack 17. USB Port 18. BAND button 19.APS button 20. SCAN button 21. RESET button 22. SD Card slot Common Operation: 1. To turn on/off the unit Press any button except the EJECT/ RELEASE button to turn on the unit.
3. To adjust the volume level Rotate the VOL knob to adjust the volume level during playback. 4. To mute or resume the sound Press the MUTE button to eliminate or resume the sound immediately during playback. To resume the sound immediately, user can also rotate the VOL knob. 5.
Radio Operation: 1. To select radio band In RADIO mode, press the BAND button shortly and repeatedly to select your desired radio band in sequence and circulation as follows: -->FM1-->FM2-->FM3-->AM1-->AM2--> 2. To select for radio station manually or automatically Press >>| or |<< button to automatically search up or down for radio station frequency, Press >>| or |<< button and hold for about 2 seconds to activate MANUAL searching mode.
interval of checking time of each AFs depends on the signal strength of current station, from a few minute for strong station to a few seconds for weak station. Every time that new AF is stronger than current station, it switches over to that frequency for very short time, and NEW FREQUENCY is displayed for 1-2 second. Because the mute time of AF switching or checking time is very short, it is almost inaudible in case of normal program. (When AF flashes on LCD, it will search for RDS station.
During playback, press 1/>|| button to pause SD, USB or Disc playback. Press again to resume MMC/SD, USB or Disc playback. Press TOP/>|| button and hold for about 1 second to play the first track. 7. To scan tracks In disc, SD, USB playback mode, press INT button to display INTRO on LCD then play the first 10 seconds part of each track of all. 8. To repeat track(s) In disc , SD or USB playback mode, press RPT button to display RPT ONE and play the current track repeatedly.
Bluetooth Hands-free System: 1. Pairing and Connection 1) Turn on the Bluetooth mode of the mobile phone; 2) Select Finding the Bluetooth Device. After searching is finished, it will show the name of the Bluetooth Device available. Select it and switch to the interface for password, Input the password 0000 and enter it. Then it will show pair OK.
In A2DP mode, if the Bluetooth device of the Mobile Phone supports AVRCP, pressing the SRC button will switch between the radio, disc, USB, CARD and A2DP. After entering A2DP mode again, it will resume playback. 7. In BT mode, press T-M button to select the following mode: PRE NUM: 1. Press “SELECT” button to enter the mode. 2. Press the “+” or “-” button to scroll through numbers. (On the right of the LCD there is a number, 0-9) It supports up to 10. 3.
Bluetooth Wireless APP Control A new and innovative method to control your MR762BRGB, is from the Boss Audio Radio Stream APP. It enables you to control your music library and all the sources right from your Android* device conveniently and safely through the free app. *Minimum Required Android OS: 2.0 To download follow these easy steps... 1.Go to the Google Play 2.
Controls & Functions Volume Home (Current View) Sources Sources The available source icons will be highlighted. If the source is unavailable (i.e. CD is not inserted), the icon will be appear dark Volume Volume control be accomplished through the “+” and “-” icons on the screen. The red bar can also be used for volume, it can be moved with your finger left or right, to lower or raise the volume respectively. The volume function will always be present in all menus, in the same location globally.
Aux-In Return Settings EQ Setting Aux-In In Aux-In mode, you have access to Settings, and Volume adjustments. CD/USB/SD/Stream Source Return Music Track Forward Track Back Settings EQ Setting CD/ USB/ SD/ Stream Modes Source Track Controls Music-Access to music library Settings– This icon will display in all sources Return– Will take you back to previous menu Music Library The List will populate to the source it is currently playing.
Settings Settings EQ– Changes Audio settings, and presets EQ curves Play– Access different play modes, Shuffle, Repeat, etc...
Clock Clock Date and time is displayed Return and Volume functions are always present APP Info Info Lets you view the APP Version your device currently has installed. We constantly update and fix bugs, the APP Version is subject to change without notice.
INSTALLATION 14
WIRING FIXED ISO SOCKET SKETCH FIXED ISO CONNECTOR A FIXED ISO CONNECTOR B 1. 1. REAR RIGHT SPEAKER(+) 2. 2. REAR RIGHT SPEAKER(-) 3. 3. FRONT RIGHT SPEAKER(+) 4.CONSTANT +12V DC 4. FRONT RIGHT SPEAKER(-) 5. AUTO ANTENNA B+ 5. FRONT LEFT SPEAKER(+) 6. 6. FRONT LEFT SPEAKER(-) 7. ACC +12V DC 7. REAR LEFT SPEAKER(+) 8. GROUND 8.
SPECIFICATION GENERAL Power supply requirement....................................................DC 12V Current consumption..........................................................10A MAX Maximum power output.......................4X60W(Measured at 14.4V) Number of channels.........................................................2 STEREO Chassis dimensions..............................( WXHXD)178X50X165(mm) 7"X1.97"X6.5" FM SECTION Frequency range..................................................87.