Service manual

17
GB
Using Optional Equipment
KLV-46/40/32/26V300A
3-198-185-11(2)
Viewing pictures from
the connected
equipment
Turn on the connected equipment, then
press / to display the connected
equipment list. Press F/f to select the
desired input source, then press . (The
highlighted item is selected if 2 seconds
pass without any operation after pressing
F/f.) When the input source is set to “Skip”
in the “Video Labels” under the “AV Set-up”
menu (page 26), that input does not appear
in the list.
z
Press / on the top edge of the TV to display the
connected equipment list and select the desired input source.
You can also press F/f to select the desired input source.
Then wait for 2 seconds to display the selected input source.
Additional operations
Using the Tools menu
Press TOOLS to display the following options when
viewing pictures from connected equipment.
~
The options displayed vary depending on the input source.
To Press
Return to normal TV
mode
a.
Change the volume of
the connected HDMI
control compatible
audio system
2 +/-.
Mute the sound of the
connected HDMI
control compatible
audio system
%.
Press again to restore.
Options Description
Close Closes the Tools menu.
Picture Mode (except
PC input mode)
See page 20.
Display Mode (in PC
input mode only)
See page 20.
Sound Mode See page 22.
Speaker See page 26.
Twin Picture (except
PC input mode)
See page 18.
PIP (in PC input
mode only)
See page 18.
Single Picture (in
Twin Picture and PIP
mode only)
Returns to single picture mode.
Audio Swap (in PIP
mode only)
See page 18.
Auto Adjustment (in
PC input mode
(except HDMI PC
input) only)
See page 29.
Horizontal Shift (in
PC input mode only)
See page 29.
Vertical Shift (in PC
input mode only)
See page 29.
i Volume Adjusts the volume of the
headphones.
Sleep Timer (except
PC input mode)
See page 27.
Power Saving See page 28.
Options Description
Continued
010COV.book Page 17 Thursday, April 19, 2007 9:10 AM