Service manual

20
GB
KLV-46/40/32/26V300A
3-198-185-11(2)
Picture menu
You can select the options listed below on the
“Picture” menu. To select options in “Settings”, refer
to “Navigating through menus” (page 19).
60
40
Picture TV
Target Inputs
Picture Mode
Reset
Colour
Hue
Colour Temperature
Sharpness
Vivid
Cool
18
Noise Reduction
Exit:
MENU
Select: Set:
MPEG Noise Reduction Low
Target Inputs
Selects whether to apply settings made in the “Picture” menu to all inputs, or only to
the input currently being watched.
“All”: Applies settings to all inputs.
“Viewing Only”: Applies settings only to the current input.
~
“Target Inputs” is not available for a PC input source.
Picture Mode
Selects the picture mode except for PC input source.
“Vivid”: For enhanced picture contrast and sharpness.
“Standard”: For standard picture. Recommended for home entertainment.
“Cinema”: For optimum picture quality of film videos.
Display Mode
Selects the display mode for PC input source.
“Video”: For video images.
“Text”: For text, charts or tables.
~
The options displayed vary depending on the input source.
Reset
Resets all the “Picture” settings except “Target Inputs”, “Picture Mode” and
“Display Mode” to the factory settings.
Backlight
Adjusts the brightness of the backlight.
~
“Backlight” is not available when you set “Power Saving” to “High” (page 28).
Picture
Increases or decreases picture contrast.
Brightness
Brightens or darkens the picture.
Colour
Increases or decreases colour intensity.
~
“Colour” is not available for a PC input source.
010COV.book Page 20 Thursday, April 19, 2007 9:10 AM