Service manual

– 24 –
KLV-26/32/40/46V300A
RM-GA008
2-2-10. Dress SP Connector assy 4P with slide
clamp (2X)
2-2-9. Dress SP Connector Assy 4P with
FG Clamp to Top DTT shield
2-2-8. Dress Connector Assy 20P(H1 wire) with Tape(LCD) & Slide Clamp.
2-2-11. i) Dress Connector Assy 20P (H4 wire) & SP Connector Assy 4P with G1 bracket's hook (4X)
ii) Apply Sheet(Core)C on LCD panel
iii) Dress Connector Assy 20P (H4 wire) with Tape(LCD)
Connector assy 20P
(H1 wire)
Tape(LCD)
SP Connector
Assy 4P
End of UL tape as
reference line
Screw 3X8
Screw boss
Caution : Pull away from
screw boss
Sheet(Core) C
Connector Assy 20P
(H4 wire)
Make sure Connector assy 20P(H4 wire)
is not tight when apply Tape LCD.
Tape(LCD)
SP Connector Assy 4P
Screw boss
Caution : Pull away from screw boss
FG Clamp
Make sure wire is
not trapped
when install Top
DTT to bottom DTT
shield