Service manual

– 27 –
KLV-26/32/40/46V300A
RM-GA008
2-3-8. Dress SP Connector Assy 4P with FG Clamp
to Top DTT shield
2-3-10. Dress Connector Assy 20P (H4 wire) &
SP Connector Assy 4P with G3 bracket's
hook(2X), Slide Clamp(3X) & Tape(LCD)
2-3-9. Dress SP Connector assy 4P with slide
clamp(3X) and Tape(LCD)
2-3-7. i) Apply Sheet(Core)C on LCD panel
ii) Dress Connector Assy 20P with Tape(LCD)
2-3-6. Dress Connector Assy 20P(H1 wire) with Tape(LCD)(2X)
Tape(LCD)
Connector assy 20P
(H1 wire)
Tape(LCD)
Connector assy 20P
Tape(LCD)
Follow panel's marking
Sheet(Core)C
Make sure Connector assy 20P
is not tight when apply Tape LCD.
Make sure wire is
not trapped
when install Top
DTT to bottom DTT
shield
SP Connector Assy 4P
End of UL tape as
reference line
FG Clamp
Screw 3X8
Tape(LCD)
Screw boss
Caution : Pull away from
screw boss
Connector Assy 20P
(H4 wire)
Tape(LCD)
SP Connector Assy 4P
Screw boss
Caution :
Pull away
from
screw boss