Service manual

– 30 –
KLV-26/32/40/46V300A
RM-GA008
2-4-6. Dress Connector Assy 20P(H1 wire) with
Tape(LCD)(2X)
2-4-5. Dress Connector Assy 20P with Tape(LCD)
2-4-8. Dress SP Connector Assy 4P with
FG Clamp to Top DTT shield
2-4-7. i) Apply Sheet(Core)C on LCD panel
ii) Dress Connector Assy 20P with Tape(LCD)
2-4-10. Dress Connector Assy 20P (H4 wire)
& SP Connector Assy 4P with Slide
Clamp(3X) & Tape(LCD)(2X)
2-4-9. Dress SP Connector assy 4P with slide
clamp(3X) and Tape(LCD)
Connector Assy 20P
Tape(LCD)
Tape(LCD)
Connector assy 20P
(H1 wire)
Tape(LCD)
Connector assy 20P
Tape(LCD)
Sheet(Core)C
Make sure Connector assy 20P
is not tight when apply Tape LCD.
Make sure wire is
not trapped
when install Top
DTT to bottom
DTT shield
SP Connector Assy 4P
Screw 3X8
FG Clamp
End of UL tape as
reference line
Tape(LCD)
Screw boss
Caution :
Pull away
from
screw
boss
Connector Assy 20P
(H4 wire)
Tape(LCD)
SP Connector Assy 4P
Caution : Pull away from
screw boss
Screw boss