Specifications

9.5.3. Power Supply Error Code Table

Error

Code

F61 The abnormalities In normal operation, when DCDET2 Press [ STOP] on

in an output or power goes to "L" (Low) (Not during POWER main unit for next error.

supply circuit of OFF condition), F61 appears on FL

POWER AMP Display and PCONT goes to "L" (Low).

This is due to speaker output has DC

voltage or fan is not working.

F76 Abnormality in the In normal operation when DCDET1 is Press [ STOP] on

output voltage of detected "L" (Low) for two consecutive main unit for next error.

stabilized power times, F76 is displayed on FL for 2

supply seconds and after that PCONT will be

turned to "L" (Low). This is due to any of

the DC voltages (+9V, +7V, -7V, +5V,

+5.3V etc.) not available.

Diagnosis Contents

Description of error

Automatic FL Display

Remarks

9.5.4. ECC Error Code Table

Error

Code

F600 Administrative It becomes impossible NaviPack etc. Press [ STOP] on

information cannot were done, and not to be able to main unit for next error.

be acquired by the acquire necessary information in the

recovery error. navigation’s changing due to wound

etc. of DISC, and to have done the

reproduction transition.

F601 Irregular sector ID It tried to access the position that did Press [ STOP] on

was demanded. not exist on DISC by the recording main unit for next error.

error etc. of authoring.

F603 KEYDET cannot be The data for decoding copyright Press [ STOP] on

acquired by the protection (CSS) cannot be acquired main unit for next error.

recovery error. due to wound etc. of DISC, and it is not

possible to reproduce.

Diagnosis Contents

Description of error Automatic FL Display Remarks

SA-PT550GCP