Specifications

Step 1 Remove 2 screws from the DVD mechanism unit.

Step 2 Detach FFC cable from the connectors (FP8251 &

FP8531) on DVD Module P.C.B. and (CS901) on Tray Loading

P.C.B.

Step 3 Lift up & remove the DVD mechanism unit.

10.12. Disassembly of Relay P.C.B.

Follow (Step 1) to (Step 3) of Item 10.3.

Follow (Step 1) to (Step 4) of Item 10.4.

Follow (Step 1) to (Step 3) of Item 10.11.

Step 1 Remove 2 screws from the Relay P.C.B.

Step 2 Detach FFC cable from the connectors (FP8002 &

FP8004)

Step 3 Remove Relay P.C.B.

Caution : Do not use strong or excessive force to avoid

damage to FFC cables.

10.13. Disassembly of DVD Module

P.C.B.

Follow (Step 1) to (Step 3) of Item 10.3.

Follow (Step 1) to (Step 4) of Item 10.4.

Follow (Step 1) to (Step 3) of Item 10.11.

Disassembly of Mecha Chassis

Step 1 Release the claws of the mecha chassis in the direction

of arrows at the bottom chassis.

Step 2 Remove the mecha chassis.

Disassembly of DVD Module P.C.B.

Step 3 Detach the USB shield wire from the connector

(FP9002) on USB P.C.B.

Step 4 Release the claws of two mini clamps on the bottom

chassis in the direction of arrows.

Step 5 Remove the USB shield wire from the mini clamps.

Step 6 Detach FFC cable from the connectors (CN2001 &

CN2010) on Main P.C.B.

Step 7 Remove 1 screw from DVD Module P.C.B.

SA-PT550GCP