MC300 Motorcycle/UTV Amplified Speaker System User’s Manual
Congratulations on your purchase of a BOSS Audio Systems Off-road amplified speaker system. It has been designed, engineered and manufactured to bring you the highest level of performance and quality, and will afford you years of listening pleasure.
MC300 Motorcycle/UTV Amplified Speaker System Contents 2 x Weatherproof, High Power Speakers with Built-in Amp 4 x Speaker Grilles 1 x Mounting Hardware Features • • • • • • • Weatherproof, High Power Speakers with Built-in Amp High-Impact, Hi-Temp ABS Exterior Extra Replacement Grilles (Optional Color Scheme 2) Stainless Steel brackets Weatherproof Wired Remote Volume Control 3.
Installation 1. 2. 3. 4. Changing the grilles (Optional) - Remove the screws in a criss-cross pattern. Be sure to install them the same way, do not overtighten. 2.5mm Hex Screws Screw the brackets to the bottom of the speakers. Find a safe, ideal mounting location and fit the brackets over the chosen mounting bars. Fasten the mounting screws after you review the safety of the mounting location. Changeable Grille Wiring 1. 2. 3. 4.
MC300 Motorcycle/UTV Amplified Speaker System BLACK/BLUE RED Bracket BLACK BLUE To Chassis Ground Power Cable Note: Connect the 12V red wire to a fused (5A) switched power source.
MC300 Motorcycle/UTV Amplified Speaker System Specifications Operation Voltage................................. 10-16V THD....................................................... <0.1% S/N....................................................... >50dB Channel Separation.............................. >50dB Frequency Response............................. 20Hz-20kHz Sensitivity.............................................
MC300 Motorcycle/UTV Amplified Speaker System BOSS Audio Systems 3451 Lunar Court • Oxnard, CA 93030 www.bossaudio.com 800.999.
