Owner`s manual
Disabling the Theft-Deterrent Feature
If
your radio is secured (SEC shows on the display) and
.'
you wish to disable it, enter your
security
code
as
follows,
pausing no more
than
15
seconds between steps.
'
'
1.
Press the
1
and
4
buttons together. Hold them
down
until SEC shows on the display.
You
are now ready
2.
Press the
SEEK
left arrow and hold it until the first
.
to enter your security code.
digit
of
your code appears.
second digit of your code appears.
digit
of
your code appears.
~,.
.'
fourth digit of your code appears.
3.
Press the SEEK right arrow and hold it until the
4.
Regs the TUNE left arrow and hold it'until the third
..'
5.
Press the TUNE right arrow and hold it until the
6.
Press
AM-FM
after you have checked that the code
you
entered matches the one you wrote down and
. .
0000
should now appear on the display.
You
will
need to repeat the above procedure.
7.
If
the code is correct, the radio will now operate.
If
the code is wrong, ERR will appear on the .display.
Unlocking the Theft-Deterrent Feature After a
Power
Loss
If
power
is
disrupted to the radio while
in
the SEC
mode, the unit will not work and LOC will show on the
display whenever the ignition is on. To unlock the unit,
press the left or riglit SEEK arrows, or the left or right
TUNE arrows and
0000 will appear on the display.
1.
Press the SEEK left arrow and hold it until the fist
digit of your code appears.
second digit of your code appears.
digit of your code appears.
fourth digit
of
your code appears.
matches the one you wrote down.
Now
the time
of
day will appear on the display. (Please note that
if
an
incorrect code is entered, ERR will appear on the
display and the above steps need to be repeated.)
2.
Press the SEEK right arrow and hold it until the
3.
Press the
TUNE
left arrow and hold it until the third
4.
Press the
TUNE
right arrow and hold it until
the
'
.
5.
Press
AM-FM
after you have checked that the code
I
\
3-16