Owner`s manual

Pull up on the latch plate to make sure it is secure. If the
belt isn’t long enough, see “Safety Belt Extender” at the
end of
this section.
Make sure the release button on the buckle
is positioned
so you would be able to unbuckle the safety belt quickly
if you ever had to.
3. Pick up the latch plate and pull the belt across you.
Don’t let it get twisted.
The shoulder belt
may lock if you pull the belt across
you very quickly.
If this happens, let the .belt go back
slightly to unlock it. Then pull the belt across you
more slowly,
4. Push the latch plate into the buckle until it clicks.
5. To make the lap part tight, pull down on the buckle
end of the belt as you pull up on the shoulder belt.
1-11