Owner`s manual
.
6.
Start the engine and let it run until you can feel'the
8.
Then replace the pressure cap. At any time during
I
. upper radiator hose getting hot. Watch out for the
this procedure if coolant begins to flow out of the
engine fans.
filler neck, reinstall the pressure cap. Be sure the
7.
By this time the coolant level inside the radiator
.
. filler neck may be lower.
If
the level
is
lower, add
arrows
on the pressure cap line up like this.
more of the proper
mix
through the filler neck until
the level reaches the base of the filler neck.