Owner`s manual

11. Pull on the harness firmly. Make sure it is properly
12. Repeat Steps 7 through 11 for the other side of
routed and isn’t twisted or flipped over.
the harness. Be sure both sides
are adjusted to the
same height.
seatback. Make sure the harness goes through the
slots
in the pad that match the height adjustment
slots being used.
13. Move the pad back against the child restraint
14, Press the pad against the fastener strips.
Securing a Child in the Built-in
Child Restraint
Now that the harness is adjusted to the correct height for
your child, you’re ready to use the child restraint’s
harness (D) to secure your child.
Don’t use the vehicle’s safety belts.