To ensure safety while driving and to comply with laws, drivers should not watch video or operate the video device while driving.
Content Automatic Memory Storing & Precaution...................................... 2 Safety Information......................... 3 Program Scanning....................... 17 Disc Note....................................... 4 RDS function.................................. 17 Installation .................................... 5 Media Operation............................. 19 Electric Connection ...................... 8 Basic Operation .............................. 20 Remote Control .................
Precaution THANK YOU FOR PURCHASING A BOSS AUDIO MULTIMEDIA PLAYER . Before operating the unit, read this manual thoroughly and keep it handy for future reference . To avoid injury or accident , read the following precautions before installing and operating the unit . ON INSTALLATION DO NOT install any receiver in locations where; - it may obstruct the steering wheel and gearshift lever operations, as this may result in a traffic accident.
Safety Information CAUTION: THIS DIGITAL VIDEO PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS DIGITAL VIDEO PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE . HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE DIGITAL VIDEO PLAYER CORRECTLY AS INSTRUCTED. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
Disc Note Disc formats supported by this player Digital Video Audio and Video Disc size 12 cm VCD Audio and Video Disc size 12 cm CD Audio Disc size 12 cm MP3 Audio Disc size 12 cm Discs which cannot be played with this player Digital Video-RAM CDV CDG Handling and Cleaning Dirt, dust, scratches and warping disc will cause misoperation. Do not place stickers or make scratches on discs. Do not warp discs. A disc should always be kept in its case when not in use to prevent from damaging.
Installation NOTES: 1. Choose the mounting location where the unit will not interfere with the normal driving function of the driver. 2. Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. 3. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions. 4.
Installation 3. Remove the PLASTIC COVER of the both sides away PLASTIC COVER 4. Insert the two KEY PLAT into the grooves at both sides of the unit as shown in figure until they click . KEY PLATE 5. Pulling the levers makes it possible to remove the unit from the dashboard .
Installation How To Remove And Install The Front Panel When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching Control Panel Before detaching the control panel, be sure to turn off the power. 1). Press the “REL” release button and the left hand side of front panel will release. RELEASE BUTTON 2). Pull-off the front panel and keep the front panel into the case . PROTECTIVE CASE Attaching Control Panel 1).
Electric Connection WIRING CONNECTION RADIO ANTENNA JACK White Yellow Red KEY 1 INPUT BROWN KEY 2 INPUT WHITE KEY GROUND BLACK RCH IN RED VIDEO IN YELLOW LCH IN WHITE 8 6 4 2 7 5 3 1 4 2 B Yellow A 5 AV IN ISO CONNECTOR REAR RCA AUDIO OUTPUT RED REAR RCA AUDIO OUTPUT WHITE SUBWOOFER GRAY REAR CAMERA INPUT YELLOW PARKING BRAKE INPUT(-) LIGHT GREEN REAR CAMERA SWITCH VIOLET/WHITE FUSE FRONT RCA AUDIO OUT SOCKET FRONT RCA AUDIO OUT SOCKET VIDEO OUTPUT SOCKET VIDEO OUTPUT SOCKET ISO CONN
Remote Control 15 16 3 17 7 5 19 2 20 1 13 21 6 23 22 14 9 18 12 24 11 26 10 4 8 25 1. CLOCK BUTTON 14. BAND/OSD BUTTON 2. PAIR/ 15. POWER BUTTON BUTTON 3. STOP BUTTON 16. >II BUTTON 4. SETUP BUTTON 17. MUTE BUTTON 5. MO/ST BUTTON 18. APS/TITLE/PBC BUTTON 6. L OCAL/DX BUTTON 19. ZOOM BUTTON 7. REDIAL/ 20. ANGEL BUTTON BUTTON 8. GOTO/ BUTTON 21. LOUD/EQ BUTTON 9. >>I/I<< BUTTON 22. 10. SELECT BUTTON 23. ENTER BUTTON 11. VOLUME+/- BUTTONS 24.
Remote Control Preparing the Remote Control Inserting the Battery 1.First push to inside as the direction indicated by the arrow (See 1 )And then Remove the battery holder as the direction indicated by the arrow (See 2 ). 2.Replace the battery Set a new battery property with (+)side up as illustrated (See 3 ). 3.Insert the battery holder. Push in the holder to the original position(See 4 ).
Basic Operation Main Menu Operation In many modes, touch the icon or touch the range to enter the main menu, the message like following as below. ILLUMINATION COLOR (3) 10:00 AM Setup interface 2 ADJUSTABLE ITEMS: GENERAL ANIMATION (1) (2) (4) 1. POWER icon In any modes, touch the POWER icon to switch the unit off . The monitor will draw in automatically . 2 MINUTE KEY BEEP ON DISC ... RADIO ... General setup interface1 GENERAL BLUETOOTH 2.
Basic Operation FORMAT This player is capable of playing discs recorded in either PAL or NTSC formats. Make the selection based on whether you are connecting the unit to a PAL TV or an NTSC TV. You can also set the unit to AUTO (auto select). The disadvantage to autoselect is that each time you turn the unit on it checks to see what kind of monitor is connected, which causes a small delay and some flickering of the display image which you may find unpleasant.
Basic Operation TREBLE: -7 to +7 Adjust treble level . -Adjustable when “NTSC “ is selected for “NTSC/PAL “ . BASS: -7 to +7 Adjust bass level . LANGUAGE Touch to select OSD language. SUBWOOFER: touch to adjust subwoofer volume and frequency. ILLUMINATION COLOR Touch to select the backlight for all buttons. Tap auto icon the backlight change automatically.
Control Panel UNIT KEYS 9 7 10 15 14 4 8 6 16 11 19 1 6 12 3 213 5 Control Panel 18 17 Sliding Plate diagram after remo ving Control Panel 1. AUXILIARY INPUT JACK Insert an external device to this AUX jack in order to have audio output of the device through the unit. 2. SEL BUTTON Press the SEL switch between BASS,TREBLE,BALANCE, FADE,SWF VOL and SWF FRE. After switching on the desired mode above, rotate VOL knob to set it. 3.
Control Panel 5/6. >>| and |<< BUTTONS In radio mode, long pressing |<< or >>| button can automatically search down or up for an available station beginning from the current frequency; Briefly pressing |<< or >>| button can manually search down or up for a your desired station beginning from the current frequency.
Touch Screen Operation RADIO OPERATION Listening to Radio Touch the RADIO ICON in home menu to enter the RADIO mode. In radio mode, tap icon that the display turn dark, tap twice turn dark more, tap thrice to turn off the display, and tap anywhere of the display to turn it on again. 10:00 AM Briefly touch “ ” to decrease frequency by one step of channel spacing.
Touch Screen Operation Automatic Memory Storing & Program Scanning Automatic Preset Setup In Radio Mode, touch and keep (for more than 2 ’ S) the screen of “ ” range to active automatic station storage. The radio searches within the current frequency band, e.g. Fm 3 , for the stronger signal level until the search cycle has finished . The six strongest stations are then allocated to the corresponding storage locations . Then the station of the first storage location is set .
Touch Screen Operation PI MUTE : the sound of another station is suppressed . TA Traffic Announcement Touch the AF section on touch screen or swing and keep the SEL knob in the TA/AF direction for about 2 seconds , the AF function is activated. The AF symbol appears in the display . (Priority For Traffic Information) In Radio mode, touch the cursor button to switch the TA function ON and OFF . When the TA function is activated, the TA symbol appears in the display .
Touch Screen Operation Media Operation In audio play mode, the message will display as below : (When Parking Brake is applied .) To skip the next track To skip the previous track Repeat Function Random Function Previous menu Tap to turn to BT PHONE mode. (after pairing and connecting a mobile phone with BT function). In audio play mode, tap icon that the display turn dark,tap twice turn dark more, tap thrice to turn off the display, and tap anywhere of the display to turn it on again.
Touch Screen Operation BASIC OPERATION Note: when the JPEG disc playback, in normal mode, you can use the cursor buttons to rotate the picture . Press UP to invert an image . Press DOWN to mirror an image . Press LEFT to rotate an image to left . Press RIGHT to rotate an image to right . Stopping Play Touch the button on remote to stop the unit playback. press the button to start play.
Touch Screen Operation T 00 1/004 C 001 /00 1 FOR VCD : Press the INT button on the remote control. It display will following menu as below : SEQ PLAY INTR O 1 2. Example for VCD/SVCD, when it is on, it will display the information such as: Note: when select the INTRO Mode, this player to start to play the previous 15 seconds part of each track/chapter on disc. (Touch it again to cancel this mode .) FOR Digital Video/MP3 : For Digital Video/MP3 , press the INT button is not available . 3.
Touch Screen Operation FOR VCD (With PBC OFF) : Touch the screen as show or press the GOTO button on remote control; the screen will display the following message : Touch the to select the your adjustment item, then select the item your favour by touching the numberic buttons , then touch the OK button to confirm .
Touch Screen Operation Digital Video Special Function 1. Multi-subtitle Language Function (for Digital Video Only) 3. Multi-Angle Function (for Digital Video Only) During Digital Video playback. Touch the icon on touch screen(or press the SUBT on the remote) . Each time the button is pressed or touch, number of the subtitle language changes in sequential order. During Digital Video playback, touch the icon on the touch screen .
Touch Screen Operation BT Operation 1.
Touch Screen Operation b. Use the number icons or buttons to input your desired phone number; * When inputting a wrong digit, use c. After finishing inputting, touch to dial out. icon or < button to delete it. icon or press button on control panel 2) Redial last dialed phone number Touch icon or long press redial button on remote control to dial out the last dialed phone number. 3) Answer a call During an incoming call, the incoming telephone number displays in the the BT PHONE interface.
Touch Screen Operation Mute function To select the Equalizer mode To decrease the volume level To increase the volume level Loudness Function Subwoofer Function Turning pre-switching for traffic announcements on and off Switching on and off an Alternative frequency Play/Pause the playing To skip the next track To skip the previous track Tap to turn to BT PHONE mode. (after pairing and connecting a mobile phone with BT function).
Touch Screen Operation AUX Operation On the front panel of this unit, there is an AUX IN jack, follow the diagram below to connect analogue replay devices(only for the Audio connect, if you want to connect the Video, please plug the
Touch Screen Operation AV Operation Please plug the
Touch Screen Operation USB OPERATION Card OPERATION Following the diagram below, connect your USB device to the front panel USB port . If it is properly connected, the device will be mounted and start playing automatically. The unit can support playback MP3/WMA/ JPEG/MP4 format which are stored on SD memory cards . Please read the following instructions before you start using a memory card .
Touch Screen Operation STEERING WHEEL CONTROL Touch the SWC icon as follow to turn to steering wheel control . 10:00 AM Touch this icon to cancel the input and resume load. When electric resistance is too low, touch this icon to increase. When electric resistance is too high, touch this icon to reduce. 10:00AM During setting, touch the turn to home menu. icon to Before operation, press the icon to cancel the original input that to set your favour.
Parental Control * Parental Control Q: After inserting a Digital Video disc into the disc slot, if a dialogue box pops up and asks you to input a password, what should you do ? A: The playing disc is locked by a rating level of parental control.
Region Code * Region Code If you insert a disc into the disc slot and REGION ERROR is displayed, the car multi-media system can not play the disc. The reason is that the region codes of the car multi-media system and the used disc do not match each other. Appendix: Region code of D igital Video Motion Picture Association of America (MPAA) divided the world into 6 regions, and gave every region a region code for locking and unlocking D igital Video playback.
Specification Specification General Power Supply Requirement..................................................DC 12V Current consumption........................................................10A MAX. Maximum Power Output ........................................................ 4 x 80W Audio Signal Output ................................ Front, Rear, and Subwoofer Output Frequency Response................................................... 20 Hz - 20 KHz S/N Ratio ...........................................
Troubleshooting Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer. SYMPTOM No power CAUSE SOLUTION The car ignition switch is not on The fuse is blown If the power supply is properly connected to the car accessory terminal,switch the ignition key to "ACC" Replace the fuse Presence of disc inside the Remove the disc in the player, then put a new one player.
