Congratulations on your purchase of a Boss Audio Systems ELITE Multimedia Receiver. It has been designed, engineered and manufactured to bring you the highest level of performance and quality, and will offer you years of entertainment pleasure. R Specifications....................................................................................................1 Safety Notice.....................................................................................................2 Accessories....................
Model No. General features BV735B Fixed front panel 6.2 inch TFT screen FM/AM Radio RBDS A-Link (Screen Mirroring) USB Charging (1A) Front USB and Micro SD support Bluetooth audio stream and hands-free phone call Push-To-Talk (PTT) AUX input AV input Video output Front/Rear view camera support Front, rear and subwoofer pre-amp outputs Max.
Please read and understand the following safety information before operating this unit. WARNING! To ensure safety while driving and to comply with laws, drivers should not watch video or operate the video device while driving. The unit is suitable for 12V power supply (requires grounding). Do not connect it to 24V power supply in trucks or buses, or else it will be damaged. Do not replace the fuse without the guidance of qualified personnel or the unit may be damaged and/or catch fire.
Remote control..............................................................1 Wire harness.................................................................1 Mounting brackets........................................................ 2 Bracket . screws .............................................................4 Trim ring........................................................................ 1 UNIT INSTALLATION Screw Bracket Screw Bracket 1. Put the 2 brackets to the left and right side of the unit. 2.
PREV / NEXT 1 2 3 4 5 6 13 7 11 • In radio mode, select a preset radio station. • During media playback, skip to the previous or next track. 12 7 Dial/answer a Bluetooth phone call. 8 Numeric buttons In radio mode, select a preset radio station (1-6). 8 9 DISP Display screen backlight setting. 10 9 10 VOL +/- Adjust volume. 11 1 SRC Select a source. Eject or end a Bluetooth phone call. 12 BAND Select a tuner band. 2 Switch the unit on or to standby.
WIRES CONNECTION DESCRIPTION The Description of the Input/Output Interface R.CAM V-IN F.CAM V-OUT SUB1 L-IN RL FL SUB2 R-IN RR FR 10A Fuse (10A) AV Inputs and Outputs AM/FM Antenna Jack Wire Harness Connector Audio/Video Inputs and Outputs R.CAM............. Rear Camera Input (Yellow) V-IN...............................Video Input (Yellow) SUB1.............. Subwoofer Output 1 (Green) L-IN.........................Left Audio Input (White) SUB2.............. Subwoofer Output 2 (Green) R-IN....
21 3 4 5 6 7 8 1 Remote sensor Aim the remote control directly at the sensor. 2 Built-in microphone Pick up sound in Bluetooth operation. 3 Return to the previous menu screen. 4 MODE Select a system mode (source). 5 PTT (Push-To-Talk) Press to access smartphone voice assistant capability via Bluetooth. 6 Function knob - Press and hold to turn the unit on or off. - Rotate to adjust volume. - In power on mode, press briefly to mute or restore volume. 7 BAND Select a tuner band.
MAIN MENU OPERATION INSTRUCTION MAIN MENU 1 1. Tuner Interface 2. Streaming Interface 3. Phone Interface 4. USB Interface 5. Micro SD Interface 6. Front/Rear Camera Interface 7. AV INPUT Interface 8. AUX IN Interface MAIN MENU 2 9. Setting Interface 10. A-LINK(Autolink) Interface There are seven Setting Menus GENERAL SETINGS-Menu 1 1. Touch to set wall paper for the home menu background. 2. Retain ACC Power: select how many seconds to delay shut down of the unit after the vehicle powers down. 3.
CAMERA SETTINGS-Menu 2 Camera Trigger Rear Camera Delay Rear Rear Camera Rear Cam Pwr Front Camera Front Cam Pwr 1. Camera Trigger: Touch to select Front/Rear/Off. Select to display the front or rear camera view, or no camera view when reversing. 2. Rear Camera: Touch to enable or disable the rear camera input. 3. Rear Cam Pwr: Touch to enable or disable power output to the rear camera. 4. Front Camera: Touch to enable or disable the front camera input. 5.
1. Touch to select whether to output sound from an external amplifier. 2. Startup volume: default volume. ① If the volume at the last shutdown is less than this volume, the volume at the last shutdown will be used when rebooting; ② if the volume at the last shutdown is greater than this volume, this default volume will be used when rebooting 3-9. Touch to set a particular volume level for each source. 10. Slide up or down to enter the previous or next menu interface.
TUNER OPERATION ABOUT SETTINGS –Menu 7 1. Touch to enter the touch calibration interface. 2. Touch to view the version number of the machine. 3. Touch to restore the machine to factory settings. 4. Touch to select whether it is necessary to display the End User License Agreement when booting up. TUNER OPERATION 1. Touch to go back to the home page. 2. Show PS,PTY and RT messages from RBDS 3. Short press to seek backwards, long press to enter manual mode. 4.
USB/MICRO SD PLAYBACK d. PTY (Programming Type) Touch an on-screen button to select a program type. The unit will search for the selected program and broadcast it. NOTE: If RBDS is turned OFF, CT/TA/AF/PTY will not function. USB/MICRO SD MUSIC/VIDEO/PICTURE OPERATION Touch the USB/SD icon in the main menu to enter the USB or Micro SD playback interface. VIDEO OPERATION USB /D:// Demo.avi Movie_720x480.rmvb 1. Keypad: Enter the number to select video. 2.
USB/MICRO SD PLAYBACK MUSIC OPERATION USB /D:// Another Way.mp3 Avenue.mp3 All By Myself.mp3 Gill In the Mirror.mp3 08/29 1. Show the music’s ID3 information 2. Time bar: show the elapsed time and total time of the current song, track number. 3. Change play mode: repeat all, repeat single, sequential play and shuffle play. 4. Skip to the previous song 5. Play/Pause 6. Skip to the next song 7. List: Touch to enter song file list. 8. View the Music/Photo/Video files 9.
BLUETOOTH OPERATION MENU Click the phone icon to enter the Bluetooth function interface. 1.Bluetooth setting menu: a.Turn Bluetooth on and off. Turn on and the display loops between the gray Bluetooth icon, the white Bluetooth icon. The icon will turn blue when a phone is paired. b.Connect automatically. c.Answer automatically. d.PIN code: The default password is "0000". e.Default Bluetooth name for this unit: BOSS AUDIO BV735B 2.Function area: a.Click to see the dialing keypad.
BLUETOOTH PHONE BOOK 1. Touch to search for a name or phone number. 2. Click to sync phonebook. 3. Contact list. BLUETOOTH PHONE CALL HISTORY 1.Click to sync phone call history. 2.Touch to show missed calls. 3.Touch to show the dialed phone number. 4.Touch to show the received phone number. BLUETOOTH DEVICE 1.Click to view the device connected to this unit. 2.Click the device name to disconnect the device. BLUETOOTH MUSIC-A2DP 1.Skip to the previous song. 2.Play/pause. 3.Skip to the next song. 4.
A-LINK(SCREEN MIRRORING) OPERATION A-LINK App allows you to mirror the screen of certain Android smartphones on the screen of this unit. Scan either of the QR codes to download the “A-LINK” App in Amazone App Store or Google Play Store and install it to your smartphone. Simply connect your smartphone to the USB port on the Google front panel using the original cable of your smartphone. Amazon Play Store App Store You will see the favorite smartphone apps directly on the screen of this unit. Note: 1.
STEERING WHEEL CONTROLS Steering Wheel Control Compatibility A third-party adapter must be used in order for this unit to be compatible with your OEM steering wheel controls. We recommend PAC SWC Series. This unit has a built-in 3.5mm SWC interface that is compatible with many popular 3rd party SWC control modules, such as PAC, METRA, and others. 10A RED or BLACK color 3.
Table 1:General problem Problem Corrective Action Casue Install new fuse with right rating Radio fuse blown Unit does not power on Screen touch is insensitive Car battery fuse blown Install new fuse with right rating Illegal operation Press the Reset button Place of touch screen is offset Go to setup menu and set the calibration Improper audio output connection Check wiring and correct VOLUME 0 Turn up the volume Volume set too low Increase the volume Heavily biased volume balance Check a
