Introduction MPWT60RGBW 6.5” (165 mm) 2-Way Marine/ Powersports Roll Cage/ Waketower Speaker Pods Congratulations on your purchase of a product. It has been engineered to bring you the highest level of performance. Its quality will afford you years of listening pleasure. Thank you for making your choice for audio entertainment! Specifications Mid Bass Driver: 6.
MPWT60RGBW 6.5” (165 mm) 2-Way Marine/Powersports Roll Cage/Waketower Speaker Pods It is strongly recommended that you work with an assistant to install these speakers. Installation instructions STEP1 STEP2 Metal base Metal base To adjust the mounting angle, loosen the metal base of the mounting band by unbolting the two screws. Make sure to put all components of the mounting hardware in a safe location. Twist the metal base to determine the optimal mounting angle for the speaker on the cage bar.
MPWT60RGBW 6.5” (165 mm) 2-Way Marine/Powersports Roll Cage/Waketower Speaker Pods STEP5 STEP6 As illustrated, secure the aluminum bands to the metal base using a pair of M6 x 75mm screws, M6 flat washers, and M6 locknuts. The locknuts must be installed into the hex shaped recess on one end of each aluminum band. Hand-tighten the screws to the degree which allows just enough freedom to rotate the speaker around the cage bar. Speaker installation now completes.
MPWT60RGBW 6.5” (165 mm) 2-Way Marine/Powersports Roll Cage/Waketower Speaker Pods LED light control The product comes with a remote control for you to control the RGB LED lights on both speakers. Keep the remote control safely using the supplied keychain tag. 1 Power on/off Turn on or off illumination. Make sure the LED power wire is connected to the source battery. 2 MODE +/Switch from static to dynamic illumination and select a dynamic illumination pattern.
0622
