Product Manual

ManualsBrandsBoss Industrial ManualsMiscellaneous PartsLog Splitter Stand for ES7TT20

STAND FOR

LOG SPLITTER

MODEL NO.

FT-5

Owner’s Manual

ASSEMBLY & OPERATING INSTRUCTIONS

Purchase Date_________________ Dealer__________________________

Boss Industrial, Inc. • 123 Ambassador Drive, Suite 123 • Naperville, IL 60540 • USA

Phone: (800) 780-BOSS (2677) • Fax (331) 472-2976

www.boss-industrial.com

Rev. 1

Summary of content (4 pages)

PAGE 1
STAND FOR LOG SPLITTER MODEL NO. FT-5 Owner’s Manual ASSEMBLY & OPERATING INSTRUCTIONS Purchase Date_________________ Dealer__________________________ Boss Industrial, Inc. • 123 Ambassador Drive, Suite 123 • Naperville, IL 60540 • USA Phone: (800) 780-BOSS (2677) • Fax (331) 472-2976 www.boss-industrial.com Rev.
PAGE 2
To The Owner Thank You! Thank you for purchasing a BOSS Log Splitter Stand. Please read this entire manual prior to assembling and moving around. This stand is only intended for the log splitter from the same manufacturer. FT-5 is available for BOSS INDUSTRIAL 7 ton log splitter ES7T20. Let’s start to set up the stand with your log splitter! NOTE: Due to the weight / size of the log splitter, it’s recommended that two or more adults be present to assist with the assembling.
PAGE 3
STEP 5: Attach the two front stands and the support bar assembly into the front legs of your splitter. See FIGURE 3 (FIGURE 3). NOTE: · · · Check all bolts and nuts are tight to be sure the stand is in safe working condition. Be extra cautious when moving the log splitter mounted on the stand on rugged and rough terrain. During operation, ensure not stumbled. Safe footing is essential in preventing accidents.
PAGE 4
Exploded Diagram & Packing List REF # PART # 1 340-098 Wheel stand PART NAME SPECIFICATIONS QTY PER SECTION 2 710-690 Hex head bolt 3 750-638 Flat Washer Zinc, M8*1 4 4 750-834 Spring Washer Zinc, M8*2.5 2 5 720-135 Nut Zinc, M8 2 6 720-678 Snap Head Nut Zinc, M10 2 7 750-525 Flat Washer Zinc, M10*1.