User Manual
Table Of Contents
12
Operation
Changing the Pedal Mode Settings
Use the following procedure when changing the Pedal mode settings.
* The pedal mode setting is stored in memory when the power is switched off.
1.
Switch off the power.
• When running on battery power:
Disconnect the connection plug from the INPUT R (MONO) jack.
• When running on power from an AC adaptor:
Disconnect the plug from the AC ADAPTOR jack.
2.
While holding down the SELECT button, switch on the power.
• When running on battery power:
Insert the connection plug into the INPUT R (MONO) jack.
• When running on power from an AC adaptor:
Insert the AC adaptor plug into the AC ADAPTOR jack.
When the button is released, the MANUAL and MEMORY indicators light up, and
the memory indicator for the current Pedal mode setting flashes.
3.
Set the pedal mode (1–3) pressing the SELECT button.
Pedal mode 1: MEMORY 1 indicator flashes.
Pedal mode 2: MEMORY 2 indicator flashes.
Pedal mode 3: MEMORY 3 indicator flashes.
4.
Press the WRITE button.
After the MEMORY Number indicator begins flashing rapidly, the setting is stored
in memory and the unit returns to its ordinary state.
* To cancel the setting change and return the unit to its ordinary state, then before you press
the WRITE button, operate the MANUAL/MEMORY or EFFECT ON/OFF pedal.
Pedal
Mode
EFFECT ON/OFF
Pedal
EFFECT ON/OFF Pedal
+
MANUAL/MEMORY Pedal
MANUAL/MEMORY Pedal
1
effect on/off
–
Switches
MANUAL/MEMORY 1/2/3/4
2
effect on/off
–
Switches MANUAL/MEMORY
3
effect on/off
Selects from MEMORY 1–4
Switches MANUAL/MEMORY