User Manual
Table Of Contents
13
Operation
Panel Operation
In order to follow along with the instructions given here, you should start out by
having effects switched ON (press the EFFECT ON/OFF pedal and confirm that
the EFFECT ON/OFF indicator has lighted), and press the MANUAL/MEMORY
pedal to switch MANUAL (MANUAL indicator has lighted).
Also set the knobs as shown in the illustration.
fig.17
1.
Select an appropriate chorus effect from the six available types.
2.
Adjust the chorus rate by rotating the RATE knob.
3.
Adjust the chorus depth by rotating the DEPTH knob.
* No function is assigned to this knob when MODE is set to “DIMENSIONAL D” or “CE-1.”
4.
Rotate the BRILLIANCE knob to adjust the amount of “glisten” in the high
end.
5.
Rotate the AMBIENCE knob to adjust the amount of body and richness in the
effect sound.
6.
Adjust the tonal qualities of the effect sound with the EFFECT TONE LOW
and HIGH knobs.
7.
Adjust the volume of the effect sound with the E.LEVEL knob.
1
76
4 5
2 3