User Manual

21
Part Names and Functions
Rear Panel
fig.26
INPUT Jacks (R (MONO), L)
This is the input jack for connecting to the
output of an electric guitar or other instrument
or effects processor.
For monaural use, make the connection to the
R (MONO) jack.
“Making the Connections” (p. 3–9)
* The INPUT R (MONO) jack also doubles as
the power switch when the unit is running
on battery power. The power comes on
when a plug is inserted into the INPUT R
(MONO) jack, and goes off when it is
unplugged. Unplug any connected cords
when the unit is not in use.
PHONES Jack
You can connect headphones here to monitor
the sound.
* Turn on the power before you connect
headphones. When turning off the power,
first unplug the headphones, then switch off
the power.
* Please observe due caution when using
headphones while the LEVEL switch is set to
+4 dBu, since their volume may get
significantly higher.
AC Adaptor Jack
This jack is for connecting an AC
adaptor (BOSS PSA-series, sold
separately). Using an AC adaptor
makes possible long performances with
no worry about batteries going dead.
LEVEL Switch
This switch sets the input level to correspond to the
device connected to the INPUT jacks.
GUITAR/BASS:
When using an electric guitar or bass guitar.
AMPLIFIER, SEND/RETURN:
When connected to send or return on a guitar
amp or the like, or when connected to a large-
volume output device
“Making the Connections” (p. 3–9)
OUTPUT Jacks (R (MONO), L)
This jack is for connection to a
guitar/bass amp, another effects
processor, mixer, MTR, or the like.
For monaural use, make the connection
to the R (MONO) jack.
“Making the Connections”
(p. 3–9)