User Manual
Table Of Contents
- IMPORTANT NOTES
- Before Using CD-R/RW Discs
- Notes When Using Mics
- Contents
- Introduction to the BR-900CD
- Panel Descriptions
- Quick Start
- Connecting Peripheral Devices
- Turning On / Off the BR-900CD
- Listening to a Demo Song
- Recording/Playing Back a Song
- (1) Preparing the Memory Card
- (2) Turning On the Power
- (3) Selecting the Song to Record
- (4) Connecting Instruments
- (5) Using Insert Effects
- (6) Using the Rhythm
- (7) Basic Recording
- (8) Playing Back Recorded Music
- (9) Overdubbing (Recording an additional performance while listening to an existing performance)
- (10) Adjusting the Sound for Each Track
- (11) Bouncing (Putting multiple tracks together)
- (12) Turning Off the Power
- (13) Removing the Memory Card
- Section 1 Recording and Playback
- Recording
- Repeating Playback (Repeat)
- Re-recording Only a Mistake (Punch-in/out)
- Canceling an Operation (Undo/Redo)
- Putting Multiple Tracks Together (Bounce)
- Loading Songs Created with the BR-864/BR-532
- Displaying the Song Information
- Section 2 Editing
- Registering Time (Locator)
- Search for the Music’s Start and End (Scrub/Preview)
- Editing the Performance on a Track (Track Editing)
- Organizing the Songs You’ve Recorded
- Creating a Master Tape / Disc
- Section 3 Using Effects
- Using the Insert Effects
- Insert Effect Parameter Functions
- Mastering
- Mastering Tool Kit Parameter Functions
- Using the Loop Effects/Track EQ
- Loop Effect Parameter Functions
- Track EQ Parameter Functions
- Fixing the Pitch of Vocals (Pitch Correction)
- The Pitch Correction
- Makeup of the Pitch Correction
- Pitch Correction Patches
- Precautions for Pitch Correction Usage
- Using the Pitch Correction
- Setting the Correction Method for Vocal Pitch (Pitch Correction Edit)
- Saving the Pitch Correction Settings (Write)
- Making Detailed Settings for Pitch Correction (Correction Event Map)
- Section 4 Using the Rhythm
- Section 5 Using the CD-R/ RW Drive
- Section 6 Using MIDI
- Section 7 Using USB
- Section 8 Other Convenient Functions
- Adjusting the Display Contrast
- Using a Foot Switch or Expression Pedal
- Tuning an Instrument (Tuner)
- Mixing the Output from an External MIDI Device with the Output from Your BR-900CD (Audio Sub Mix)
- Using Condenser Microphones (Phantom Power)
- Copying Difficult Songs (Phrase Trainer)
- Initializing the BR-900CD’s Settings
- Conserving Battery Power (Power Save)
- Utility Parameter List
- Section 9 Appendices
109
Using the Loop Effects/Track EQ
Section 3
Adjusting How the Loop
Effect is Applied
The following explains how you can alter the volume of the
signals sent by each track to the loop effects (the send level),
and control the degree to which the loop effects are applied.
1. Press [LOOP EFFECTS].
2. Press CURSOR [ ] [ ] to move the cursor to “CHO/
DLY” or “REV,” and press [ENTER].
fig.01-705d
3. Press CURSOR [ ] [ ] to select the screen for setting
the send level of each track appears.
When using CHO/DLY
fig.01-706d
When using REV
fig.01-707d
4. Use [CURSOR] and the TIME/VALUE dial to adjust
the send level for each track.
* Pressing a REC TRACK button moves the cursor to the track
corresponding to the button pressed.
If you then press CURSOR [ ], the screen for setting
the input-source send level appears in the display; if you
press CURSOR [ ], the one for setting the Rhythm
send level is displayed.
fig.01-708d
fig.01-709d
To adjust the send level for the input source, move the
cursor to “In Send.” To adjust the send level for the
Rhythm, move the cursor to “Rhy Send.” The setting is
adjusted by turning the TIME/VALUE dial to the
desired value.
5. After you have completed adjusting the send level,
press [EXIT] repeatedly to return to the Play screen
You can switch screens in the following sequence, with the
screen cycling to the next screen each time [LOOP EFFECTS]
is pressed.
Loop Effects selection screen → Send Level screen →
Type screen → Play screen