User Manual
Table Of Contents
- IMPORTANT NOTES
- Before Using CD-R/RW Discs
- Notes When Using Mics
- Contents
- Introduction to the BR-900CD
- Panel Descriptions
- Quick Start
- Connecting Peripheral Devices
- Turning On / Off the BR-900CD
- Listening to a Demo Song
- Recording/Playing Back a Song
- (1) Preparing the Memory Card
- (2) Turning On the Power
- (3) Selecting the Song to Record
- (4) Connecting Instruments
- (5) Using Insert Effects
- (6) Using the Rhythm
- (7) Basic Recording
- (8) Playing Back Recorded Music
- (9) Overdubbing (Recording an additional performance while listening to an existing performance)
- (10) Adjusting the Sound for Each Track
- (11) Bouncing (Putting multiple tracks together)
- (12) Turning Off the Power
- (13) Removing the Memory Card
- Section 1 Recording and Playback
- Recording
- Repeating Playback (Repeat)
- Re-recording Only a Mistake (Punch-in/out)
- Canceling an Operation (Undo/Redo)
- Putting Multiple Tracks Together (Bounce)
- Loading Songs Created with the BR-864/BR-532
- Displaying the Song Information
- Section 2 Editing
- Registering Time (Locator)
- Search for the Music’s Start and End (Scrub/Preview)
- Editing the Performance on a Track (Track Editing)
- Organizing the Songs You’ve Recorded
- Creating a Master Tape / Disc
- Section 3 Using Effects
- Using the Insert Effects
- Insert Effect Parameter Functions
- Mastering
- Mastering Tool Kit Parameter Functions
- Using the Loop Effects/Track EQ
- Loop Effect Parameter Functions
- Track EQ Parameter Functions
- Fixing the Pitch of Vocals (Pitch Correction)
- The Pitch Correction
- Makeup of the Pitch Correction
- Pitch Correction Patches
- Precautions for Pitch Correction Usage
- Using the Pitch Correction
- Setting the Correction Method for Vocal Pitch (Pitch Correction Edit)
- Saving the Pitch Correction Settings (Write)
- Making Detailed Settings for Pitch Correction (Correction Event Map)
- Section 4 Using the Rhythm
- Section 5 Using the CD-R/ RW Drive
- Section 6 Using MIDI
- Section 7 Using USB
- Section 8 Other Convenient Functions
- Adjusting the Display Contrast
- Using a Foot Switch or Expression Pedal
- Tuning an Instrument (Tuner)
- Mixing the Output from an External MIDI Device with the Output from Your BR-900CD (Audio Sub Mix)
- Using Condenser Microphones (Phantom Power)
- Copying Difficult Songs (Phrase Trainer)
- Initializing the BR-900CD’s Settings
- Conserving Battery Power (Power Save)
- Utility Parameter List
- Section 9 Appendices
17
Panel Descriptions
Front Panel
Input section
SENS knob
Use this knob to adjust the sensitivity at the input jacks (e.g.,
GUITAR/BASS, MIC1, MIC2, and LINE).
PEAK indicator
This indicator shows how strong the input level is at the
various input jacks (e.g., GUITAR/BASS, MIC1, and MIC2).
This indicator lights at a level -6 dB lower than where sound
distortion occurs. Adjust the input sensitivity with the SENS knob
so that this indicator lights only occasionally, at those moments
when you play your guitar (or other instrument) at its loudest.
INPUT SELECT buttons
Use these buttons to select the input source (input jack) that
you wish to record. The indicator of the selected button will
light. You can mute (silence) the input sound by pressing a
button that is lit.
[GUITAR/BASS/MIC2]
For selecting either guitar or bass use of the GUITAR/BASS
jack, or the MIC 2 jack.
[MIC]
For selecting either the MIC1 jack, or the internal
microphone.
* You can turn on and off the internal microphone. (p. 34)
[LINE]
For selecting the LINE jack (stereo) for the line inputs, such
as keyboards or CD players.
SIMUL
By pressing [GUITAR/BASS/MIC2] and [MIC]
simultaneously, you can record from both inputs at the same
time.
* If the INPUT SELECT setting is changed, the insert effect
bank (p. 35, p. 84) changes automatically.
INPUT LEVEL knob
Use this knob to adjust the volume of the input source for
recording.
* If you use the INPUT LEVEL knob to turn down the volume
of the input source during recording, the sound will be
recorded in the audio track at a low volume, so that noise will
be more apparent when you raise the volume of the audio track
for playback.If you want to lower the sound of the input source
that you are monitoring, lower the volume with the MASTER
fader. To change the volume of the music being played back,
use the TRACK fader for the respective tracks.
[TUNER]
Use this button to turn on and off the tuner (p. 188).
This allows you to tune your instrument connected to the
GUITAR/BASS jack.
1
2
3
13
4
9
8 7
5
6
10
11
12
1