User Manual
Table Of Contents
- IMPORTANT NOTES
- Before Using CD-R/RW Discs
- Notes When Using Mics
- Contents
- Introduction to the BR-900CD
- Panel Descriptions
- Quick Start
- Connecting Peripheral Devices
- Turning On / Off the BR-900CD
- Listening to a Demo Song
- Recording/Playing Back a Song
- (1) Preparing the Memory Card
- (2) Turning On the Power
- (3) Selecting the Song to Record
- (4) Connecting Instruments
- (5) Using Insert Effects
- (6) Using the Rhythm
- (7) Basic Recording
- (8) Playing Back Recorded Music
- (9) Overdubbing (Recording an additional performance while listening to an existing performance)
- (10) Adjusting the Sound for Each Track
- (11) Bouncing (Putting multiple tracks together)
- (12) Turning Off the Power
- (13) Removing the Memory Card
- Section 1 Recording and Playback
- Recording
- Repeating Playback (Repeat)
- Re-recording Only a Mistake (Punch-in/out)
- Canceling an Operation (Undo/Redo)
- Putting Multiple Tracks Together (Bounce)
- Loading Songs Created with the BR-864/BR-532
- Displaying the Song Information
- Section 2 Editing
- Registering Time (Locator)
- Search for the Music’s Start and End (Scrub/Preview)
- Editing the Performance on a Track (Track Editing)
- Organizing the Songs You’ve Recorded
- Creating a Master Tape / Disc
- Section 3 Using Effects
- Using the Insert Effects
- Insert Effect Parameter Functions
- Mastering
- Mastering Tool Kit Parameter Functions
- Using the Loop Effects/Track EQ
- Loop Effect Parameter Functions
- Track EQ Parameter Functions
- Fixing the Pitch of Vocals (Pitch Correction)
- The Pitch Correction
- Makeup of the Pitch Correction
- Pitch Correction Patches
- Precautions for Pitch Correction Usage
- Using the Pitch Correction
- Setting the Correction Method for Vocal Pitch (Pitch Correction Edit)
- Saving the Pitch Correction Settings (Write)
- Making Detailed Settings for Pitch Correction (Correction Event Map)
- Section 4 Using the Rhythm
- Section 5 Using the CD-R/ RW Drive
- Section 6 Using MIDI
- Section 7 Using USB
- Section 8 Other Convenient Functions
- Adjusting the Display Contrast
- Using a Foot Switch or Expression Pedal
- Tuning an Instrument (Tuner)
- Mixing the Output from an External MIDI Device with the Output from Your BR-900CD (Audio Sub Mix)
- Using Condenser Microphones (Phantom Power)
- Copying Difficult Songs (Phrase Trainer)
- Initializing the BR-900CD’s Settings
- Conserving Battery Power (Power Save)
- Utility Parameter List
- Section 9 Appendices
29
Quick Start
Listening to a Demo Song
Selecting a song (Song Select)
Upon power-up, the song that was selected before the power
was turned off is selected, and the data of that song is loaded.
As soon as the data has been loaded, the Play screen appears
in the display.
To listen to a demo song, follow the procedure given below.
fig.00-312
1. Press [UTILITY].
2. Press CURSOR [ ] [ ] to move the cursor to “SEL,”
and press [ENTER].
The Song Select screen appears.
fig.00-313d
3. Turn the TIME/VALUE dial to select “01: SOLOBANG.”
4. Press [ENTER].
■
If you have changed the recording or editing
Since the BR-900CD automatically updates the recorded data
and operation content if the recording or editing have been
changed, you do not need to perform any special operations
for saving.
During updating, “Keep power on!” appears in the upper
line of the display, while the lower line shows what is being
processed.
* If you try to record or edit data using a protected demo song,
“Protected!” appears.
Playing back a song
1. Move the TRACK faders 1–6, 7/8 and the RHYTHM
fader to the positions shown in the figure below, and
lower the MASTER fader.
fig.00-315
2. Press [PLAY].
fig.00-316
The song starts. Slowly increase the MASTER fader and
adjust the volume to the desired level.
Use of the demo song supplied with this product for any
purpose other than private, personal enjoyment without the
permission of the copyright holder is prohibited by law.
Additionally, this data must not be copied, nor used in a
secondary copyrighted work without the permission of the
copyright holder.
By adjusting the TRACK faders, you can listen to the
individual sounds recorded to each track one at a time or
listen to them at the balance you desire.
Press [FF] to fast-forward the song and press [REW] to
rewind the song. Press [ZERO] to move to the time
location 00:00:00-00.0.
Title Composer Copyright
SOLOBANG! Yutaka Nakano
Copyright © 2005
BOSS Corporation
1
2
2,4
3