User Manual
Table Of Contents
- IMPORTANT NOTES
- Before Using CD-R/RW Discs
- Notes When Using Mics
- Contents
- Introduction to the BR-900CD
- Panel Descriptions
- Quick Start
- Connecting Peripheral Devices
- Turning On / Off the BR-900CD
- Listening to a Demo Song
- Recording/Playing Back a Song
- (1) Preparing the Memory Card
- (2) Turning On the Power
- (3) Selecting the Song to Record
- (4) Connecting Instruments
- (5) Using Insert Effects
- (6) Using the Rhythm
- (7) Basic Recording
- (8) Playing Back Recorded Music
- (9) Overdubbing (Recording an additional performance while listening to an existing performance)
- (10) Adjusting the Sound for Each Track
- (11) Bouncing (Putting multiple tracks together)
- (12) Turning Off the Power
- (13) Removing the Memory Card
- Section 1 Recording and Playback
- Recording
- Repeating Playback (Repeat)
- Re-recording Only a Mistake (Punch-in/out)
- Canceling an Operation (Undo/Redo)
- Putting Multiple Tracks Together (Bounce)
- Loading Songs Created with the BR-864/BR-532
- Displaying the Song Information
- Section 2 Editing
- Registering Time (Locator)
- Search for the Music’s Start and End (Scrub/Preview)
- Editing the Performance on a Track (Track Editing)
- Organizing the Songs You’ve Recorded
- Creating a Master Tape / Disc
- Section 3 Using Effects
- Using the Insert Effects
- Insert Effect Parameter Functions
- Mastering
- Mastering Tool Kit Parameter Functions
- Using the Loop Effects/Track EQ
- Loop Effect Parameter Functions
- Track EQ Parameter Functions
- Fixing the Pitch of Vocals (Pitch Correction)
- The Pitch Correction
- Makeup of the Pitch Correction
- Pitch Correction Patches
- Precautions for Pitch Correction Usage
- Using the Pitch Correction
- Setting the Correction Method for Vocal Pitch (Pitch Correction Edit)
- Saving the Pitch Correction Settings (Write)
- Making Detailed Settings for Pitch Correction (Correction Event Map)
- Section 4 Using the Rhythm
- Section 5 Using the CD-R/ RW Drive
- Section 6 Using MIDI
- Section 7 Using USB
- Section 8 Other Convenient Functions
- Adjusting the Display Contrast
- Using a Foot Switch or Expression Pedal
- Tuning an Instrument (Tuner)
- Mixing the Output from an External MIDI Device with the Output from Your BR-900CD (Audio Sub Mix)
- Using Condenser Microphones (Phantom Power)
- Copying Difficult Songs (Phrase Trainer)
- Initializing the BR-900CD’s Settings
- Conserving Battery Power (Power Save)
- Utility Parameter List
- Section 9 Appendices
51
Section 1
Repeating Playback (Repeat)
By using the “Repeat function” you can repeatedly play back
a specified part. Repeating playback allows you to check the
mixing balance or perform loop recordings (p. 56) with the
punch in/out functions.
The position in the song where [REPEAT] is pressed first
becomes repeat start point (A), and the position where it is
pressed a second time becomes repeat end point (B). The
portion between the two points is then repeated during
playback.
fig.01-201
Press [REPEAT] again to cancel the repeat function and
delete the start and stop points.
Setting the Repeat Portion
1. Enter the repeat start point (A).
Move to the position where you want the repeat to start
and press [REPEAT].
fig.01-202
The position is set as repeat start point (A).
The [REPEAT] indicator begins to flash, telling you that
the repeat start point (A) has been registered.
If you wish to re-do the registration, you can cancel the
registered location by pressing [REPEAT] when the
current location is the same as the repeat start point (A).
If the current location is beyond the repeat start point
(A), press [REPEAT] twice to cancel the registration.
The [REPEAT] indicator goes out, and the registered
repeat start point (A) and end point (B) are deleted.
2. After registering the repeat start point (A), register the
repeat end point (B).
Move to the position where you want the repeat to end
and press [REPEAT].
fig.01-203
That position becomes repeat end point (B).
The [REPEAT] indicator lights, telling you that the
repeat end point (B) has been registered.
To re-do the registration, press [REPEAT] once again.
The [REPEAT] indicator goes out, and the registered
repeat start point (A) and end point (B) are deleted.
Then press [REPEAT] again and register repeat start
point (A) and end point (B) as desired.
* There must be at least one second between repeat start point
(A) and repeat end point (B). It is not possible to set the end
point less than one second away from the start point.
* If you press [REPEAT] at a position before the repeat start
point (A), that earlier position is then set as the repeat start
point (A).
3. If you want to save the settings in the currently selected
song, hold down [STOP], and press [REC].
“Saving the Current Settings to the Song (Song Save)” (p. 79)
* During updating, “Keep power on!” appears in the upper line
of the display, while the lower line shows what is being
processed.
Repeat
Repeat Start
(A)
Repeat End
(B)
Time