User manual

Basic Operation
English Deutsch Français Italiano Español Português Nederlands
Loop Playback
Play back phrases as loops.
Pressing the left pedal switches the
unit to overdubbing.
Overdubbing
Layer your performances while the
phrase plays as a loop.
Pressing the left pedal switches the
unit to playback.
Stop
Regardless of the timing, pressing
the right pedal will stop the current
track.
One-Shot Playback
The track for which one-shot has been specied will play only once.
Refer to “Specifying How a Phrase Will Play/Stop
(Stop Mode/One-Shot Playback)” (p. 10).
Display Track 1 Track 2
oL
One shot Loop
Lo
Loop One shot
oo
One shot One shot
Press the right pedal
NOTE
* While phrase memory is being read, the PLAY (green) indicator will blink rapidly. Never turn o the
power while the PLAY indicator is blinking rapidly.
* The minimum recording time for a loop phrase is approximately 1.5 seconds. If you press the pedal within
approximately 1.5 seconds after you start recording, recording will continue until the phrase is at least
approximately 1.5 seconds long.
* The maximum recording time for a loop phrase is approximately 3 hours (total for all phrases). When the maximum
recording time is exceeded, the display will show “
FL” to indicate that internal memory is full, and recording
or overdubbing may end before you intended. If this occurs, delete unneeded phrases (p. 10) and then try the
operation again.
* If you use the Memory Shift function before saving a phrase, that phrase will be erased. For details on how to save
a phrase, refer to p. 10.
9
• You can Undo and Redo (p. 11). • To use the Memory Shift function, press the
[ ] / [ ] buttons while a phrase is playing;
the phrase memory number will blink,
allowing you to select the next phrase (p. 16).
• If you want the two tracks to stop
simultaneously, press the right pedal twice in
succession.