User manual

16
Connecting to an External Footswitch
When Connecting an FS-5U
* The FS-5L cannot be used.
Operation Explanation
Switch the
current track
Pressing the foot switch will switch
the current track.
Memory shift (up)
Holding down the foot switch for two
seconds or longer switches you to the
next-numbered phrase memory.
If you press the foot switch during
playback, the newly selected phrase
memory number will blink in the
display, and the phrase memory
will be changed when the currently
playing phrase has ended.
* If the current phrase has not been saved, that
phrase will be lost when you perform the memory
shift. For details on how to save a phrase, refer to
p. 10.
• If you perform the memory shift operation near the
end of the phrase, there may be cases in which the
shift-destination phrase memory will not be selected.
• You can also perform memory shift operations by
pressing the [
] / [ ] buttons.
When Connecting Two FS-5Us or
an FS-6
When you operate an FS-5U connected to the
white plug (stereo L side) or pedal B of an FS-6
The operation will be the same as when a single FS-5U is
connected.
When you operate an FS-5U connected to the
red plug (stereo R side) or pedal A of an FS-6
Operation Explanation
LOOP FX on/o
Pressing the foot switch will turn
LOOP FX on/o.
Memory shift
(down)
When you hold down the foot
switch for at least two seconds, the
previous-numbered phrase memory
will be selected.
Switching the
LOOP FX TYPE
To switch the LOOP FX TYPE, hold
down the B pedal of the FS-6 (FS-5U of
stereo L side) while you press (within
2 seconds) the A pedal of the FS-6
(FS-5U of stereo R side).
Connect your foot switch to the FOOT SW jack as shown in the illustration, and set its POLARITY switch.
POLARITY switch
When Connecting an FS-5U
When Connecting Two FS-5Us When Connecting an FS-6
Cable:
Stereo 1/4” phone type
1/4” phone type x 2
MODE/POLARITY switch
Cable:
1/4” phone type
fg
1/4” phone type
Cable:
Stereo 1/4” phone type fg
Stereo 1/4” phone type
or or