User manual

17
English Deutsch Français Italiano Español Português Nederlands
Other Settings
About Sleep Mode
When ten hours have elapsed since the last operation
or audio input, the RC-30 will enter sleep mode (power
conservation mode; only the bypass sound will be output).
From sleep mode, you can press the pedal to return to
normal mode.
* Battery power continues to be consumed even
in sleep mode. To prevent battery consumption,
turn o the power by removing the plug from the
OUTPUT L jack.
* The RC-30 will not enter sleep mode if there is a
phrase that has not been saved.
Disabling Sleep Mode
1. While holding down the left pedal, turn
on the power (insert a plug into the
OUTPUT L jack).
2. Continue holding down the left pedal
for ve seconds.
The display will blink “__” and the POWER indicator
will blink.
3. Release the left pedal; the RC-30 will
resume normal operation.
Enabling Sleep Mode (default
setting)
1. While holding down the left pedal, turn
on the power (insert a plug into the
OUTPUT L jack).
2. Within two seconds after the display
appears, step on the left pedal two more
times.
The display will blink “SL” and the POWER indicator
will blink.
After two seconds, the RC-30 will resume normal
operation; sleep mode will be enabled.
Changing the Switching Order of
Recording g Overdubbing g Playback
When you press the left pedal, the RC-30 will switch its
operation in the order of recording g overdubbing g
playback (default setting) (p. 8). However, you can change
this so that the order is recording g playback g overdub-
bing (RC-20XL compatible).
1. While holding down the [TAP TEMPO]
button, turn on the power (insert a plug
into the OUTPUT L jack).
2. Use the [
] / [ ] buttons to select the
desired mode.
Display Explanation
rd
Operation will switch in the order of
Recording g Overdubbing g Playback
(default setting).
rP
Operation will switch in the order of
Recording g Playback g Overdubbing
(RC-20XL compatible).
3. Press the [TAP TEMPO] button to return
to normal operation.
Formatting the Internal Memory
* When you format the RC-30’s internal memory, all
phrase memories that were saved will be erased,
and cannot be recovered. Do not format the internal
memory unless the display indicates “
Er” and the
RC-30 has stopped operating correctly.
1. While holding down the [WRITE] button
and the [RHYTHM ON/OFF] button, turn
on the power (insert a plug into the
OUTPUT L jack).
The display will indicate “FN.”
2. Press the [RHYTHM ON/OFF] button
once again.
The display will blink “FN.”
3. Press the [WRITE] button; formatting of
the internal memory will begin.
The indication “FN” in the display will blink rapidly.
When formatting is completed, the RC-30 will return
to normal operation.
* Never turn o the power while “
FN” is blinking
rapidly.