User manual

19
English Deutsch Français Italiano Español Português Nederlands
Other Display Indications
Display Explanation Page
1–99
Phrase memory number
p. 8
. (dot)
Phrase memory containing data
oL
One-shot phrase on track 1 only
p. 9
Lo
One-shot phrase on track 2 only
oo
One-shot phrases on tracks 1 and 2
LP
Loop playback
p. 10
oS
One-shot playback
Fo
Fade-out and then stop
LE
Play to the end of the phrase and
then stop
Un
Undo
p. 11
rE
Redo
CL
Tack clear
r
Save phrase p. 10
dL
Delete phrase p. 10
Display Explanation Page
no
Normal recording
p. 11
AU
Auto recording
Ct
Count-in recording
r0–r9
Rhythm type p. 12
b3–b4
Time signature p. 13
Cn
USB connected
p. 14
dC
USB disconnected
SL
Sleep mode enabled
p. 17
__
Sleep mode disabled
rd
Switch in the order of record/
overdub/play
p. 17
rP
Switch in the order of record/play/
overdub
FN
Format internal memory p. 17
Troubleshooting
Problem Action
Recording does not end
immediately when you
press the right pedal
If rhythm is on, or if you recorded a phrase that is shorter than the minimum recording time
(approximately 1.5 seconds), the length of the phrase is adjusted automatically; this may mean
that recording does not end immediately when you press the right pedal.
Recording started
immediately even
though Auto recording
mode is selected
If due to distortion or other causes there is a signicant amount of noise, that noise may be
enough to trigger the beginning of recording. Reduce the noise, for example by lowering the
distortion level.
Cannot change the
playback tempo
You cannot change the playback tempo in the following situations.
• If the phrase has not been saved.
• While phrases are being switched (PLAY indicator blinking rapidly).
• When you attempt to set the tempo for a phrase that is looped over an interval shorter
than the minimum recording time (approximately 1.5 seconds).
Error Message List
Display Meaning Action Page
bt
The battery has run low. Replace the battery. p. 3
FL
Memory is full. Delete unneeded phrases. p. 10
UF
This WAV le is unplayable. Check the format of the WAV le. p. 14
EF
Further overdubbing is not possible. Re-save the phrase. p. 10
Er
Internal memory must be formatted. Format the RC-30’s internal memory. p. 17
dN
The RC-30 has malfunctioned. Contact your dealer.