User manual
Panel Descriptions
5
English Deutsch Français Italiano Español Português Nederlands
Name Explanation Page
4
RHYTHM
p. 12
[OUTPUT LEVEL] knob This adjusts the volume level of the rhythm sound.
[TYPE] button Species the rhythm type.
[ON/OFF] button This button turns the rhythm sound on/o.
[TAP TEMPO] button Press this button at the desired timing to set the tempo.
5
MIC
p. 6
[INPUT LEVEL] knob
Adjusts the input level from the MIC IN jack. Turning the knob all the way to
the left will turn o the microphone input.
PEAK indicator
Lights when the input level exceeds the allowable level. Adjust the [INPUT
LEVEL] knob so that the PEAK indicator lights occasionally when you sing
most loudly into the microphone.
6
POWER indicator Lights when the power is on. p. 7
7
REC, PLAY indicator
p. 8
REC (red) indicator Lights during recording.
PLAY (green) indicator
Lights during playback (while loading a phrase memory or performing an
internal memory operation: blinks rapidly).
During overdubbing, both the REC (red) indicator and the PLAY (green)
indicator will light.
8
Left pedal
p. 8
Switches the unit between
recording/overdubbing/
playback
If the phrase is empty: recording g overdubbing g playback
If the phrase contains data: playback g overdubbing
Undo/Redo
During playback or overdubbing, hold down the left pedal for two or more
seconds to undo (cancel the recording or the most recent overdubbing).
To carry out a redo, once again depress the pedal for two or more seconds
(the sound that was eliminated will be restored).
p. 11
LOOP FX on/o Press twice to turn LOOP FX on/o. p. 14
9
Right pedal
p. 9
Stop Stops the track currently being overdubbed or played.
Stop all Press twice to stop both tracks simultaneously.
Tap tempo
While stopped, press the right pedal repeatedly to set the tempo to the
timing at which you pressed it.
p. 12
Switch tracks
To switch the selected track, hold down the right pedal for at least two
seconds.
p. 8
* You can clear the track by holding down the right pedal and pressing the left pedal.