User Manual
Table Of Contents
- Getting Ready
- Basic Operation
- Editing a Patch
- Saving a Patch
- Parameter List
- Convenient Functions
- Synchronizing with a DAW or External MIDI Device
- Assigning a Function to an External Pedal
- Restoring the Factory Default Settings
- Transmitting Data to an External MIDI Device
- Troubleshooting
- Main Specifications
- USING THE UNIT SAFELY
- IMPORTANT NOTES
13
Parameter List
MODE: TERA ECHO
Parameter Explanation
RESONANCE This adjusts the amount of resonance (and the tone coloration) of the eect sound.
MODE: SLOW ATTACK
Parameter Explanation
SENS
Adjusts the sensitivity of the slow gear.
When it is set to a lower value, the eect of the slow gear can be obtained only with a stronger picking, while
no eect is obtained with a weaker picking. When the value is set higher, the eect is obtained even with a
weak picking.
RISE TIME Adjusts the time needed for the volume to reach its maximum from the moment you begin picking.
MODE: FILTER
Parameter Explanation
LFO TYPE Selects the curve at which the lter is moved.
LFO RATE Adjusts the rate at which the lter is moved.
LFO DEPTH Adjusts the range over which the lter is moved.
TYPE Selects the type of lter (LPF/BPF/HPF).
CUTOFF Adjusts the frequency at which the lter operates. Higher values raise the frequency.
RESONANCE Adjusts the operation of the lter. Higher values produce a stronger tonal character.
FILTER POS Species whether the lter is placed before or after the delay.
MODE: SHIMMER
Parameter Explanation
PITCH SHIFT Species the amount of pitch shift in semitone units.
PITCH FINE
Species a ne adjustment to the amount of pitch shift. A change of 100 in the Fine setting corresponds
to a change of 1 in the Pitch Shift setting.
PITCH BAL Adjusts the balance between the pitch-shifted sound that is input to the delay and the direct sound.
DIRECT FB
Adjusts the amount of feedback for the delay that is applied to the direct sound. This is specied as a
proportion (%) relative to the feedback specied by the [FEEDBACK] knob.
MODE: SFX
Parameter Explanation
BIT DEPTH Species the bit depth.
SAMPLE RATE Species the sampling rate.
LoFi BAL Adjusts the volume balance between the direct sound and the eect sound.
TR WAVE Adjusts changes in volume level. A higher value will steepen wave’s shape.
TR RATE Adjusts the frequency (speed) of the change.
TR DEPTH Adjusts the depth of the eect.
MODE: PATTERN
Parameter Explanation
PATTERN
Selects the delay pattern.
You can choose from preset patterns PAT1–PAT10 and the USER pattern which you are free to set.
DELAY 1–16 TIME Adjusts the proportion relative to the Delay 1–16 delay time when PATTERN is set to “USER.”
DELAY 1–16 LEVEL Adjusts the Delay 1–16 volume when PATTERN is set to “USER.”
DELAY 1–16 PAN Adjusts the Delay 1–16 stereo position when PATTERN is set to “USER.”