User Manual

14
Parameter List
MODE: DUAL
Parameter Explanation
DUAL MODE Species whether the two delays are connected in series or in parallel.
DUAL TYPE Selects the type of delay.
DUAL LINK Link the delay time and feedback of the second delay to the settings of the rst delay.
D2 TIME Species the delay time of the second delay. This is the same as the [TIME/VALUE] knob.
D2 FEEDBACK
Adjusts the amount of feedback (repetition) for the second delay. Higher values produce a larger
number of delay repeats. This is the same as the [FEEDBACK] knob.
D2 E. LEVEL Adjusts the volume of the second delay sound. This is the same as the [E. LEVEL] knob.
MODE: VINTAGE DIGITAL
Parameter Explanation
TYPE Selects the type of unit that is being modeled.
FILTER Turns the high-cut lter on/o when TYPE is set to “SDE-3000.”
TIMEx2
Species whether the sampling frequency is halved and the delay time doubled when TYPE is set to
“SDE-2000” or “SDE-3000.”
MODE: TAPE
Parameter Explanation
TYPE Selects the type of unit that is being modeled.
MODE: ANALOG
Parameter Explanation
STAGE Species the number of BBD stages. The delay time lengthens in proportion to the number of stages.
CONTROL
Parameter Explanation
TAP/CTL Species whether the [TAP/CTL] switch is used as TAP or as CTL.
CTL FUNC Species how the [TAP/CTL] switch operates when pressed if it is being used as CTL.
CTL 1/2 PREF
Species whether the CTL 1/2 switch has a dierent setting for each patch or the same setting shared by all
patches.
CTL 1/2 FUNC Species the operation that occurs when the CTL 1/2 switch is pressed.
CTL 1/2 MODE
Species whether the setting is on only while the CTL 1/2 switch is held down or whether the setting
alternates on/o each time the switch is pressed.
EXP PREF
Species whether the EXP pedal has a dierent setting for each patch or the same setting shared by all
patches.
EXP FUNC Species the operation that occurs when the EXP pedal is pressed.