User Manual
Table Of Contents
- Getting Ready
- Basic Operation
- Editing a Patch
- Saving a Patch
- Parameter List
- Convenient Functions
- Synchronizing with a DAW or External MIDI Device
- Assigning a Function to an External Pedal
- Restoring the Factory Default Settings
- Transmitting Data to an External MIDI Device
- Troubleshooting
- Main Specifications
- USING THE UNIT SAFELY
- IMPORTANT NOTES
17
Parameter List
SYSTEM
Parameter Explanation
CONTRAST Adjusting the contrast of the display
OUTPUT Selects how output occurs.
BANK MODE Species the timing at which the patch is changed when you change banks.
BANK EXTENT MIN Sets the lower limit for the banks.
BANK EXTENT MAX Sets the upper limit for the banks.
KNOB LOCK Species whether knob operations will be disabled.
KNOB MODE Species how knob operations occur.
BYPASS Species how the bypass sound is output.
PEDAL ACT
Species whether the operation occurs when you press the [A], [B], or [TAP/CTL] switch or when you release
the switch.
FSW HOLD TIME
Species the number of seconds of holding down the [A], [B], or [TAP/CTL] switch that is interpreted as a
long-press.
FSW MODE Species how the footswitch is used (p. 19).
USB MODE Species the USB operating mode (p. 21).
LOOP MODE Species the sampling frequency.
MIDI
Parameter Explanation
Rx CHANNEL Species the receive channel.
Tx CHANNEL Species the transmit channel.
PC IN Species whether program changes are received.
PC OUT Species whether program changes are transmitted.
CC IN Species whether control changes are received.
CC OUT Species whether control changes are transmitted.
TIME CONTROL Species whether operations of the [TIME/VALUE] knob are transmitted and received.
A SW CC [A] switch
Species the controller number of the corresponding knobs or switches.
B SW CC [B] switch
TAP/CTL SW CC [TAP/CTL] switch
FEEDBACK CC [FEEDBACK] knob
E. LEVEL CC [E. LEVEL] knob
TONE CC [TONE] knob
MOD DEPTH CC [MOD DEPTH] knob
CTL1 CC External CTL1 switch
CTL2 CC External CTL2 switch
EXP CC External EXP pedal
EFFECT ON/OFF CC Species the controller number that switches between delay-on and bypass.
LOOP ON/OFF CC Species the controller number that switches the phrase loop function on/o.
LOOP REC/DUB CC
Species the controller number that executes recording or overdubbing when using the phrase loop
function.
LOOP PLAY CC Species the controller number that executes loop playback when using the phrase loop function.
LOOP STOP CC Species the controller number that stops playback when using the phrase loop function.
LOOP CLEAR CC Species the controller number that clears the phrase when using the phrase loop function.
SYNC Selects the tempo clock input that is used for synchronization.
REALTIME SRC
Selects the source of the realtime messages that are transmitted from the MIDI OUT connector or the USB
port.
MIDI IN->OUT Species the connector to which MIDI messages received from the MIDI IN connector are output.
USB IN->OUT Species the connector to which MIDI messages received from the USB port are output.
DEVICE ID Sets the MIDI Device ID used for transmitting and receiving System Exclusive messages.