User Manual

5
Basic Operation
Adjusting the Delay
[MODE] knob
Selects the type of delay.
STANDARD Clear digital delay.
TERA ECHO Spacious echo sound with movement, neither reverb nor delay.
SLOW ATTACK Delay with a suppressed attack as if the volume is being faded-in.
FILTER Delay with a swept lter added.
SHIMMER Delay with pitch-shifted sound mixed in.
SFX Delay with a sound-eect character.
REVERSE Produces an eect where the sound is played back in reverse.
PATTERN Sixteen independently-settable delays.
DUAL A delay comprising two dierent delays connected either in series or in parallel.
VINTAGE DIGITAL Vintage digital delay with the warmth of an early unit.
TAPE Provides the characteristic wavering sound of the tape echo.
ANALOG Gives a mild analog delay sound.
[TONE] knob
Adjusts the tone of the eect’s sound.
The frequency response is at when
the knob is set to the center position;
turning it to the right boosts the higher
frequencies, and turning it to the left
cuts the higher frequencies.
[TIME/VALUE] knob
Adjusts the delay time.
To make larger changes in the value,
turn the knob while pressing it.
[E. LEVEL] knob
Adjusts the volume of the eect sound.
[TAP/CTL] switch
You can easily set the delay
time to match the tempo
of the song being played
by pressing the pedal
in time with the song’s
tempo (Tap Input).
If you like, you can assign
this switch to a dierent
function (p. 8).
[
I
] [
H
] buttons
Switch screens.
[
H
] [
I
]
[
H
]
[
I
]
[
H
] [
I
]
Tempo
Delay time
Note length relative to the tempo
[
H
]
[
I
]
Delay timeDelay time
Top screen
Turn the [TIME/VALUE] knob to adjust
the value.
[MOD DEPTH] knob
Adjusts the modulation depth of the
delay sound.
[FEEDBACK] knob
Adjusts the feedback level (or how
much the sound is repeated).
* Oscillation may occur with certain
input sounds, or when the knob is
set at certain positions.
[A] [B] switches
Switch banks/patches (p. 7).