User Manual
Table Of Contents
- Getting Ready
- Basic Operation
- Editing a Patch
- Saving a Patch
- Parameter List
- Convenient Functions
- Synchronizing with a DAW or External MIDI Device
- Assigning a Function to an External Pedal
- Restoring the Factory Default Settings
- Transmitting Data to an External MIDI Device
- Troubleshooting
- Main Specifications
- USING THE UNIT SAFELY
- IMPORTANT NOTES
6
Basic Operation
Turning Delay On/O
Patch A delay
Each time you press the [A] switch, the delay alternately turns on (lit blue) / o (unlit).
Patch B delay
Each time you press the [B] switch, the delay alternately turns on (lit blue) / o (unlit).
Press once
Blue: on Unlit: o
MEMO
You can also make settings so that patches A and B are used simultaneously (p. 19).
Patches and Banks
Settings for MODE, FEEDBACK, EFFECT LEVEL, TONE, MOD DEPTH, and TIME are collectively
called a “patch.” You can select patches using [A], [B], and [TAP/CTL] switches (p. 19). A
combination of patches A, B, and C is called a “bank.”
Bank down
Bank up
BANK 02
BANK 99
BANK 01
Patch 01A Patch 01B Patch 01C
* If you want to use the [TAP/CTL] switch to select patch C, refer to “Assigning the Functions of the [A], [B], and [TAP/CTL]
Switches” (p. 19).