Specifications

and then click on the Assign button.
The “light” in the Assign button will be on if any of the individual assigns are on.
The assign select panel underneath shows which assigns are on by putting a red
background under the assign name/number.
H OW DO I SELECT S UB - EFFECTS ?
For effects that are in groups (like MOD on the GT-3 and GT-5, or FX2 on the GT-6
and GT-8), a list of the sub-effects is shown in a panel underneath the effects
buttons. This has selection boxes next to each sub-effect name. Click on the
required sub-effect selection box.
In some cases, this list is too long to fit across the width of the display. In this case,
there are scroll arrows on the left (as above) and right. Click on these to show the
other available sub-effects.
D OES THE GT-

 TRACK CHANGES ?
Yes - whist the editor is open, any changes you make to the patch settings in GT
Manager are also made to the temporary patch in the GT-. The GT- should not
be in bulk mode.
H OW DO I UNDO CHANGES ?
Either click on the Cancel button to quit the editor and lose all the changes, or click
on the Restore button to undo all the changes and keep the editor open.
You can’t undo individual changes.
W HAT IS “GT E DIT ”?
Click on “GT Edit” to turn this feature on and off. Be sure to turn the feature off
when you’re done.
This function allows you to edit patch parameters whilst still playing your guitar.
This means you can get the sound you’re after more quickly.
When you activate this function, the CTL pedal on the GT- is used to select the
various on-screen control knobs. A short press takes you to onto the next control
knob; a longer press takes you back to the previous one. On the GT-10, use CTL 1