Specifications

to go to the previous control, and CTL 2 to go to the next control (a long press on
either pedal reverses the direction). The EXP pedal is used to move the control
knob. So you can now adjust patch parameters using your feet – leaving your
hands free to carry on playing.
Whilst this feature is activated, the normal functions of the CTL and EXP pedals are
switched off.
This function only allows you to change the parameters with the control knobs and
sliders in the editor; the parameters and settings on checkboxes cannot be changed
this way.
H OW DO I CHANGE THE F X ORDER ?
In the “Mstr” (Master) Fx, you can see the effect order and which effects are on.
To move effects in the chain, simply drag and drop them (hold down
the left mouse button whilst moving the mouse).
Note that the GT-10 preamps can’t be moved out of their separate
chains!
P RESET S ETTINGS
All the preset effects settings are included in the drop-down list-box. For the GT-3,
GT-5, GT-8 and GT-10, this list also includes the user-defined preset effects settings
(U1 onwards). These are stored in the system memory area. If you didn’t bulk
dump your system data to GT Manager yet, the user-preset names will be blank.
For effects with sub-effects (like MOD on the GT-3 and GT-5, or FX2 on the GT-6),
the list includes all the presets for the whole set of sub-effects.
Save the current effect settings to one of the user locations by clicking on
the Save button.
Q UICKLY GOING TO THE P REVIOUS / N EXT PATCH
Use the << and >> buttons to save changes to the current patch and display the
settings for the next patch.