Specifications

You can put the GT- in Bulk Receive either before or after you select Load
One from the Edit menu.
H OW DO I TRANSFER TO THE GT-

?
If you only want to transfer one patch, then simply select it. GT Manager sends the
patch data to the GT-. You can then save the data in any patch location (see
below).
For the GT-3, GT-5, GT-6 and GT-8, if you want to transfer all the patches in the file,
first put the GT- into Bulk Receive mode. Next, select Bulk send to GT-3 (for
GT-3 files) from the File menu. The menu will change to Bulk send to GT-5 for
GT-5 files, Bulk send to GT-6 for GT-6 files and to Bulk send to GT-8 for GT-8
files. The GT-10 can accept bulk data at any time (and in fact doesn’t have a Bulk
Receive mode).
Once the transfer is finished, press the Exit button on the GT- (except for the
GT-10).
The system data is not transferred with the patch data. You can send the system
data from the PC from the System Editor.
H OW DO I S AVE D ATA IN THE GT-

?
If you have just transferred a single patch by selecting it from the patch window, it
will not be saved yet on the GT-. You need to press the Write button on the
GT-, and then select a patch location to save the data to.
If you did a bulk transfer to the GT-, press the Exit button on the GT- (except
for the GT-10). This will then exit bulk dump mode on the effects pedal and store
all the data.